745044
5
Zoom out
Zoom in
Previous page
1/12
Next page
INTRODUCTION
GETTING STARTED
QUICK START
Refer to the supplied CI 940 Quick Setup Guide for basic instructions in
setting up your new NAD CI 940. The following important notes must also
be observed when setting up your CI 940.
IMPORTANT SETUP NOTES
· Before setting up or making connections, ensure that the CI 940 and
other devices to be connected to CI 940 are unplugged or powered
down.
· Connect the speaker cables to the supplied speaker connectors by
following the corresponding ZONE 1 (and/or ZONE 2) speaker terminal
connections (R+/-, L+/-) as reected in the CI 940 rear panel.
· Bare wire or loose strands from the speaker cables must not touch the
rear panel or other speaker terminals.
· After installing the speaker cables to the supplied speaker connectors,
plug in the speaker connector to ZONE 1 (and/or ZONE 2) speaker
terminal of CI 940.
· Connect corresponding end of the mains power cord to the AC mains
input of CI 940 and the plug connected to a mains power source.
· Set the POWER switch at the rear panel to “ON” setting. The Standby LED
indicator will illuminate amber. Press the STANDBY button to turn ON
the CI 940. The Standby LED indicator will turn from amber to blue.
SAVE THE PACKAGING
Please save the box and all of the packaging in which your CI 940 arrived.
Should you move or otherwise need to transport your CI 940, this is by
far the safest container in which to do so. We’ve seen too many otherwise
perfect components damaged in transit for lack of a proper shipping
carton, so please: Save that box!
NOTES ON INSTALLATION
· Place your NAD CI 940 on a rm, level surface.
· Avoid placing the unit in direct sunlight or near sources of heat and
damp.
· Do not place the unit on a soft surface like a carpet.
· Do not place the CI 940 in an enclosed position such as a bookcase
or cabinet that may impede the air-ow through the ventilation slots.
Allow adequate ventilation.
· Make sure the unit is switched o before making any connections.
· The RCA sockets on your NAD CI 940 are color coded for convenience.
Red and white are Right and Left audio respectively. Use high quality
leads and sockets for optimum performance and reliability.
· Ensure that leads and sockets are not damaged in any way and all
sockets are rmly pushed home.
· Should water get into your NAD CI 940, shut o the power to the unit
and remove the plug from the AC socket. Have the unit inspected by a
qualied service technician before attempting to use it again.
· Use a dry soft cloth to clean the unit. If necessary, lightly dampen the
cloth with soapy water. Do not use solutions containing benzol or other
volatile agents.
DO NOT REMOVE THE COVER; THERE ARE NO USERSERVICEABLE
PARTS INSIDE.
5
ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD CI 940 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD CI 940 in the language / languages: English as an attachment in your email.

The manual is 1,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD CI 940

NAD CI 940 Quick start guide - English - 2 pages

NAD CI 940 User Manual - German - 12 pages

NAD CI 940 User Manual - Dutch - 12 pages

NAD CI 940 User Manual - French - 12 pages

NAD CI 940 User Manual - Italian - 12 pages

NAD CI 940 User Manual - Swedish - 12 pages

NAD CI 940 User Manual - Spanish - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info