577603
10
Zoom out
Zoom in
Previous page
1/14
Next page
CD-R AND CD-RW AUDIO DISCS
The C 516BEE can play back CD-R or CDRW audio discs that have been
recorded on a computer or CD recorder. The quality of CD-R, CD-RW audio
discs varies widely which may aect playability. Some factors that aect
playability:
• The quality of the disc itself. Generally speaking, CD-R, CD-RW blanks
from well-renowned companies give better results than unbranded
ones.
• The quality of CD-recorder or computer CD re/writer. Some recorders
and writers produce better results than others.
• The CD-R and CD-RW were created with high-speed writing. In general,
the quality of a CD-R or CD-RW is better when produced at a lower
speed against a higher speed on the same recorder or re/writer.
PLAYING MP3/WMA FILES
The C 516BEE can play MP3/WMA formatted recordings on CD-R or CD-RW
discs. You may mix any of the le types on the disc. Using the CD 7 remote
control, one can select through the MP3/WMA folders and les as well as
start playback through the following steps
1 Load the applicable disc.
2 Press [FOLDER ] to select desired folder. Press [ENTER].
3 Press [FILE ] to select desired le number. You must be at STOP or
playback mode to access both folders.
4 Press [ENTER] to start playback. For each le type being played, the
C 516BEE will display the le type at the VFD and a corresponding icon
at the VFD. Information about the Song Title, Album and Artist name, if
available, will scroll through the VFD during playback.
NOTES
• Thelenumberisrecognizedperdisc,notperfolder–thatis,the
numberassignedtoeachlecorrespondstotheirsequenceinthedisc.
• Ifyouwanttoselectlenumber“9”inadiscwherethereare100ormore
MP3/WMAles,press“0”twiceandthen“9.
PROGRAMMING
The program function enables you to store your favorite tracks from any
disc in the player memory. When programming a sequence of tracks, the
C 516BEE must be in STOP mode. Using the CD 7 remote control, enter your
desired program sequence through the following steps
1 Press [PROGRAM]. The display indicates “P01 T00”. The “00” in the “T00”
keeps on blinking, meaning that the player is awaiting the rst Program
entry.
2 Use the Direct-Entry numeric keypad buttons to enter the rst track
in your planned sequence. Upon entering the track number, the VFD
will briey show the total number and total time of the currently
programmed tracks like TTL 01 3:25”.
3 The display will revert to show “P02 T00, indicating that the player is
ready for your second program entry. Upon entering the second track,
the VFD will again briey show the total number and total time of the
currently programmed tracks like TTL 02 6:45”“TTL 02” indicates that
there are now a total of two programmed tracks and “6:45” is the total
playback time of both programmed tracks.
4 Repeat steps 2 and 3 to select and store other track numbers in
memory, up to a maximum of 40 entries. If you attempt to program
more than 40 tracks or les, “P-FULL will be displayed in the VFD.
5 Press [PROGRAM] to end or nalize the program – the VFD will show the
last programmed number and track.
6 Press to start program playback.
NOTES
• TheprocedureforprogrammingMP3/WMAlesisthesameasabove
withanexceptionatstep2and3–thetotalnumberofprogrammed
lesandtotalplaybacktimewillnotbedisplayedduringprogramming.
• Ifyouwanttoselectlenumber“9”inadiscwherethereare100ormore
MP3/WMAles,press“0”twiceandthen“9.
• PressingSTOPkeyatanytimeduringtheprogrammingprocedurewill
puttoaSTOPthesequenceandclearallthecurrentlyprogrammed
tracksorles.VFDwillrevertbacktodisplayingthetotalnumberof
tracksandtotalplaybacktimeforaudioCDandtotalnumberoflesfor
MP3/WMA.
• PressingSTOPkeytwiceduringprogramplaybackwillresulttohaving
the whole program list deleted.
REVIEW / EDIT PROGRAM LIST
1 Initiate review or edit of your program entries through either of the
following initial steps
• If you are still in programming mode, press [PROGRAM].
• If during program playback, press [STOP] once then [PROGRAM].
2 The VFD will show the rst Program Number and the corresponding
“blinking” programmed track.
3 To change the programmed track of a particular sequence, use the
Direct-Entry numeric keypad buttons. Press [SKIP or ] to move
forward or backward the programmed tracks as well as review the list
and change if so desired.
4 If you want to delete a particular program sequence during program
review, press [DELETE] key.
5 After nalizing your program changes or completing your review, press
[PROGRAM] again.
PROGRAM PLAYBACK
1 To play the stored program, press [PLAY] while you are in “PROGRAM”
mode. “PROG” icon will appear in the display, indicating that a stored
program is being played. During Program Play, the SKIP buttons will
access only the tracks in the program list.
2 If you want to play only a portion of a stored program, initiate play and
press SKIP to jump over the programmed tracks that you dont want to
hear.
STOP OR DELETE PROGRAM
1 To terminate Program play, press [STOP] once. The stored track list
remains in memory. If you want to play the program again, simply press
[PLAY].
2 To clear the program memory, perform any of the following steps
• Press [STOP] twice during program playback.
• Press [OPEN] to open the disc tray.
• Switch OFF the power.
OPERATION
USING THE C 516BEE  FEATURES
10
ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD C516BEE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD C516BEE in the language / languages: English as an attachment in your email.

The manual is 1,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD C516BEE

NAD C516BEE User Manual - German - 14 pages

NAD C516BEE User Manual - Dutch - 14 pages

NAD C516BEE User Manual - French - 14 pages

NAD C516BEE User Manual - Italian - 14 pages

NAD C516BEE User Manual - Swedish - 14 pages

NAD C516BEE User Manual - Spanish - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info