493510
12
Zoom out
Zoom in
Previous page
1/16
Next page
USB MODE
The C 565BEE can play back MP3/WMA les stored in external USB
(Universal Serial Bus) devices. The following are the C 565BEE’s capabilities
with respect to USB device playability.
USB SUPPLEMENTARY INFORMATION
Maximum number of folders supported 128
Maximum le in one folder 511
Maximum le in device 65408
Maximum number of sub-directory 8
Maximum number of bytes supported for Folder/File name 64
Maximum number of bytes supported for ID3 Title/Artist/Album 60
Maximum bit rate supported VBR, 320K
HDD handling capacity (additional power adapter maybe required for
some HDD models)
FAT 16/32
USB version supported 1.1
LISTENING TO USB DEVICE
1 Toggle [SOURCE] button to select “USB” mode. If no external USB device
is connected to the front panel’s USB input, “No USB” will be displayed
in the VFD. If there are no applicable MP3/WMA les available in the
external USB, the VFD will show “USB Empty.
2 Plug-in the external USB device to the USB input – “USB Reading” will be
blinking in the VFD and then the total number of les will displayed.
3 Press [ ] to start playback.
SELECTING DIRECTORIES OR FILES
The following are the steps on how to select a desired directory and MP3 or
WMA le at stop mode.
1 Connect the external USB device to the front panel’s USB input. Toggle
[SOURCE] button to select “USB mode.
2 Press [FOLDER ] to select desired folder. Press [ENTER].
3 Press [FILE ] to select desired le number.
4 Press [ENTER] to start playback. Toggle CD 9’s [DISP] button to show
information about the current le. Refer also to the item about DISPLAY at
the FRONT PANEL section of the IDENTIFICATION OF CONTROLS page.
NOTE
Do not disconnect the USB ash drive during playback. It may cause
damage to the C 565BEE.
OPTICAL INPUT MODE
The C 565BEE is equipped with an optical digital input. This makes it
possible for other external digital sources to make use of C 565BEE as a top
quality digital-to-analog converter. The C 565BEE accepts audio data only at
this optical input port and can handle up to 192 kHz/24 bit signals.
LISTENING TO OPTICAL INPUT
1 Toggle [SOURCE] button to select “Optical Input” mode. If no source
component is connected at the rear panel OPTICAL DIGITAL AUDIO
IN port or if the source is not supplying a signal, the VFD will display
“UNLOCKED. If the source supplies a non-valid data such as compressed
format, Dolby Digital or DTS audio signal, the VFD will display “Not
Support”; only audio data is supported.
2 When the C 565BEE detects a valid digital audio input, the VFD will
show the audio format and the current sample rate. Toggle CD 9’s [SRC]
button if you would like to change the sample rate of the input signal.
3 Audio available from the connected external digital source will now be
the active input.
OPERATION
USING THE C 565BEE USB AND OPTICAL INPUT MODE
12
ENGLISH FRAAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD C 565 BEE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD C 565 BEE in the language / languages: English as an attachment in your email.

The manual is 1,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD C 565 BEE

NAD C 565 BEE User Manual - German - 16 pages

NAD C 565 BEE User Manual - Dutch - 16 pages

NAD C 565 BEE User Manual - French - 16 pages

NAD C 565 BEE User Manual - Italian - 16 pages

NAD C 565 BEE User Manual - Swedish - 16 pages

NAD C 565 BEE User Manual - Spanish - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info