667804
5
Zoom out
Zoom in
Previous page
1/20
Next page
IDENTIFICATION OF CONTROLS
FRONT PANEL
1 POWER INDICATOR
This indicator will be amber when the C 368 is in standby mode.
When the C 368 is powered up from standby mode, this indicator
will change from amber to blue color.
2 STANDBY BUTTON
Press Standby button to switch ON the C 368 from standby mode.
The Power indicator will change from amber to blue color.
Pressing Standby button again switches back C 368 to standby
mode. The Power indicator will change from blue to amber color.
The Standby button cannot activate the C 368 if the rear panel
POWER switch is o.
IMPORTANT NOTES
For the Standby button to activate, the following must occur:
a The supplied power cord from the C 368 must be plugged in to a power
source.
b The rear panel POWER switch must be set to ON.
3 NAVIGATION AND ENTER BUTTONS
The navigation [d/f/a/s] and [ENTER] buttons are used to go
through menu options and selections.
Use [d/f/a/s] to go up, down, left or right given options or
selections.
The middle round button is designated as [ENTER] button. This is
normally pressed to complete a selection, procedure, sequence or
other applicable functions.
4 HEADPHONE
A 1/4” stereo jack socket is supplied for headphone listening and
will work with conventional headphones of any impedance.
The volume, tone and balance controls are operative for
headphone listening. Use a suitable adapter to connect
headphones with other types of sockets, such as 3.5mm “personal
stereo jack plugs.
5 DISPLAY
Show visual and menu information according to the selected
settings.
The following Main menu options are shown in the display - Source
Setup, Settings and BluOS Setup (available if MDC BluOS module is
installed).
Use the SR 9 remote control or front panel navigation [d/f/a/s]
and [ENTER] buttons to go through menu options and selections.
6 REMOTE SENSOR
Point the SR 9 remote control at the remote sensor and press the
buttons.
Do not expose the remote sensor of the C 368 to a strong light
source such as direct sunlight or illumination. If you do so, you may
not be able to operate the C 368 with the remote control.
Distance: About 23ft (7m) from the front of the remote sensor.
Angle: About 30o in each direction of the front of the remote sensor.
7 a SOURCE s
Press a SOURCE or SOURCE s to select Sources.
8 VOLUME
The VOLUME control adjusts the overall loudness of the signal sent
to the loudspeakers. The Volume control is characterized by perfect
signal tracking and channel balance. It provides a highly linear and
low noise operation.
Turn clockwise to increase the volume level and counter clockwise
to lower it.
The default volume level is -20dB.
Hybrid Digital DAC Amplifier C 368
NA
D
VOLUME
SOURCE
© NAD C368
7 81 2 3 4 65
5
ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD C 368 - Hybrid Digital DAC Amplifier at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD C 368 - Hybrid Digital DAC Amplifier in the language / languages: English as an attachment in your email.

The manual is 2,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD C 368 - Hybrid Digital DAC Amplifier

NAD C 368 - Hybrid Digital DAC Amplifier User Manual - German - 20 pages

NAD C 368 - Hybrid Digital DAC Amplifier User Manual - Dutch - 22 pages

NAD C 368 - Hybrid Digital DAC Amplifier User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info