493506
15
Zoom out
Zoom in
Previous page
1/18
Next page
CONDITION POSSIBLE CAUSES POSSIBLE SOLUTIONS
No sound. Mains power cord unplugged or power not
switched ON.
Check if mains power cord is plugged in and
power switched ON.
TAPE MONITOR selected. De-select TAPE MONITOR mode.
Mute on. Switch o Mute.
Rear PRE OUT/MAIN IN amp links not tted. Fit links.
No sound one channel. Balance control not centered. Center Balance control.
Speaker not properly connected or damaged. Check connections and speakers.
Input lead disconnected or damaged. Check leads and connections.
No audio despite the presence of an active
input at DISC rear panel input terminals.
DISC input is disabled due to an installed
MDC module at the MDC Classic Upgrade
slot.
Uninstall the MDC module from the MDC
Classic Upgrade slot.
No audio despite the presence of an active
input at MP rear panel input terminals.
An external Media Player is connected to the
front MP socket.
Unplug the Media Player connected to the
front MP socket.
Weak bass/diused stereo image. Speakers wired out of phase. Check connections to all speakers in the
system.
C 356BEE does not respond to remote
control commands.
Battery at or incorrectly inserted. Check or replace battery. Follow correct
battery insertion setup.
Infrared receiver (IR) window of the C 356BEE
or IR transmitter of the remote control is
obstructed.
Check IR windows and ensure clear line-of-
sight from remote control to C 356BEE.
IR receiver in direct sun or very bright
ambient light.
Place unit away from direct sun, reduce
amount of ambient light.
Standby LED turns red during operation. C 356BEE has overheated. Shut down C356BEE by turning o the rear
panel POWER switch. Ensure that there is
adequate space below, above and to the
sides of the C356BEE to allow proper air ow.
After C356BEE has cooled down, turn back
ON. Restart again the C356BEE by switching
ON the rear panel POWER switch and then
pressing the front panel STANDBY button or
remote control’s [ON] button.
Overall impedance of loudspeakers too low. Ensure the overall loudspeaker impedance is
not below 4 ohms.
REFERENCE
TROUBLESHOOTING
15
ENGLISHPORTUGUÊS FRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD C 356 BEE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD C 356 BEE in the language / languages: English as an attachment in your email.

The manual is 1,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD C 356 BEE

NAD C 356 BEE User Manual - German - 18 pages

NAD C 356 BEE User Manual - Dutch - 18 pages

NAD C 356 BEE User Manual - French - 18 pages

NAD C 356 BEE User Manual - Italian - 18 pages

NAD C 356 BEE User Manual - Portuguese - 18 pages

NAD C 356 BEE User Manual - Swedish - 18 pages

NAD C 356 BEE User Manual - Spanish - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info