667805
14
Zoom out
Zoom in
Previous page
1/16
Next page
Network Mode
If there is no user interface interaction and no active source input
within 20 minutes, the unit switches to standby mode at reduced
system performance level (less than 2W).
Network and Bluetooth connections are maintained at network
standby mode.
At network standby mode, the C 338 can be switched back to
operating mode using any of the following methods.
- Activate or play network connected App
- Play paired Bluetooth source
- Rotate VOLUME knob or press AMP 3 remote control’s VOLUME
d/f buttons
- Press any of the a SOURCE s or BASS EQ buttons
- Press front panel Standby button or AMP 3 remote control’s [ON]
button
AUTO SENSE
Auto sense feature enables the C 338 to wake up from standby mode
when triggered by an active (digital/analog) audio source input.
Enable/Disable Auto Sense mode
While in operating mode, press and hold BASS EQ button until A (On) is
shown in the front panel display.
Repeat the same to disable Auto Sense mode but this time the display
should show “-” (O ).
A (On): Unit wakes up from standby mode when triggered by active audio
source input.
- (O): Unit remains at standby mode even if it is triggered by active audio
source input.
IMPORTANT NOTES
With Auto Sense mode set to “On”, the unit cannot go to standby
mode as long as there is an active audio source input. Undertake the
following to enable the unit to go to standby mode with Auto Sense set
to “A” (On).
Shut down or pause your audio source input(s)
Set Auto Sense setting to ”-“ (O)
INFRARED LEARNING
Infrared (IR) Learning enables any non-NAD remote control learn IR remote
control codes. With the learned codes, the congured non-NAD remote
control can be used to command or operate the C 338. The IR remote
control codes are based from the supplied AMP 3 remote control.
HOW TO LEARN IR REMOTE CONTROL CODES
1 Press and hold at the same time front panel BASS EQ and a SOURCE
buttons until “F1” appears on the front panel display. The display of “F1”
indicates that the unit is at IR learning mode.
2 A total of twelve IR remote control codes can be learned. These codes
are dened as “F1, F2….F12” and are identied by their allocation in the
AMP3 remote control layout below.
3 Use front panel a SOURCE or SOURCE s to toggle through F1, F2…F12.
4 For example, to learn “F5” (Volume Up), toggle a SOURCE or SOURCE s
until “F5” is shown in the front panel display.
5 Press BASS EQ and “F5” will begin to ash.
6 While pointing the non-NAD remote control to the front panel display,
press the corresponding button on the non-NAD remote control where
“F5” will be learned. “F5” will stop ashing, briey stay solid and then the
next command (F6) is displayed. The solid “F5” indicates that “F5” code is
already learned by the non-NAD remote control.
7 Repeat the same process above to learn other IR remote control codes.
8 To save the learned IR remote control codes and at the same time exit IR
learning mode, press and hold the front panel BASS EQ and aSOURCE
buttons until the front panel display reverts to volume level display.
AUTOMATIC SOFTWARE DOWNLOAD
Upon powering up and conguring the Wi-Fi connection of your C338,
it will begin an installation process to ensure it has the newest device
software. Do not interrupt the power supply or enter new commands
during this installation process.
The display will initially show in percentage the progress of software
download.
The C 338 will then get automatically updated with the downloaded
software. The update progress is indicated in the display as progressive
“-“ (dash) marks. When the display appears like the image below, the
process is completed and the unit will automatically restart.
NOTE
This installation process is initiated periodically to keep C 338 updated
with the latest software.
OPERATION
USING THE C 338
AMP 3
BAS SDI M
AMP 3
BAS SDI M
F1 F2
F3 F4
F11
F5
F6 F7
F8 F9
F10 F12
14
ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD C 338 Hybrid Digital Integrated Amplifier at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD C 338 Hybrid Digital Integrated Amplifier in the language / languages: English as an attachment in your email.

The manual is 2,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD C 338 Hybrid Digital Integrated Amplifier

NAD C 338 Hybrid Digital Integrated Amplifier User Manual - German - 16 pages

NAD C 338 Hybrid Digital Integrated Amplifier User Manual - Dutch - 16 pages

NAD C 338 Hybrid Digital Integrated Amplifier User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info