493508
13
Zoom out
Zoom in
Previous page
1/13
Next page
USING THE AMP 2 REMOTE CONTROL
The AMP 1 remote control has been replaced by the new AMP 2 remote control.* All functions remain
the same except for the industrial design.
The AMP 2 remote control handset handles the key functions of the C 316BEE. It has additional
controls to remotely operate NAD CD Players. It will operate up to a distance of 23ft (7m). When a
command from the remote control is received, the Standby LED indicator will blink.
1 ON/OFF: The AMP 2 remote control has separate ON and OFF buttons. Press ON button to switch
the unit from standby to operating mode. Press OFF button to switch the unit to standby mode.
2 MUTE: Press [MUTE] button to temporarily switch OFF the sound to the speakers or headphones.
MUTE mode is indicated by the Standby LED indicator ashing. Press MUTE again to restore sound.
3 VOL d/f : Press [VOL d/f] button to increase or decrease the loudness level. Release the button
when the desired level is reached. The VOLUME buttons do not aect recordings made using the
TAPE output.
4 INPUT SELECTORS: Refer to the corresponding labels printed on the assigned remote control
buttons to make use of these functions. The input selector buttons perform the same functions as
the buttons labeled the same on the front panel.
5 CD PLAYER CONTROL (applicable only to compatible NAD CD Player models): Some of the
control buttons below are applicable only to specic NAD CD Player models; check the owners
manual of your NAD CD Player for control button compatibility.
g Stop playback.
j Pause playback temporarily.
u Start playback.
k Open or close disc tray.
0 Go to next track or le.
9 Go to beginning of current/ previous track or le.
* Eective from serial number H19C319BEEG21347
AUTO STANDBY (FOR 230V VERSION MODEL ONLY)**
Auto Standby feature is an integral feature of the C 316BEE that conforms to European ecodesign
regulations. When Auto Standby is enabled, the C 316BEE will automatically go to standby mode if
there is no audio or user interface interaction for 30 minutes.
Auto Standby can be enabled or disabled by the following button combinations and STANDBY LED
display indicators.
Enable: Press and hold at the same time POWER and AUX button until the STANDBY LED ashes
once. Auto Standby feature is activated.
Disable: Press and hold at the same time POWER and AUX button until the STANDBY LED ashes
twice. Auto Standby feature is deactivated.
** Eective from serial number H33C316BEEG33069
ADDENDUM SHEET FOR C 316BEE
AMP 2
DISC
AUX
CD
VIDEO
TUNER
TAPE
1
2
3
5
1
4
NAD is a trademark of NAD Electronics International, a division of Lenbrook Industries Limited
Copyright 2013, NAD Electronics International, a division of Lenbrook Industries Limited
ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD C 316 BEE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD C 316 BEE in the language / languages: English as an attachment in your email.

The manual is 1,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD C 316 BEE

NAD C 316 BEE User Manual - German - 12 pages

NAD C 316 BEE User Manual - Dutch - 12 pages

NAD C 316 BEE User Manual - French - 12 pages

NAD C 316 BEE User Manual - Italian - 12 pages

NAD C 316 BEE User Manual - Swedish - 12 pages

NAD C 316 BEE User Manual - Spanish - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info