493503
7
Zoom out
Zoom in
Previous page
1/12
Next page
1 CHANNEL B SPEAKERS (applicable to CHANNEL B only): Connect the
right speaker to the CHANNEL B SPEAKERS terminals marked “R +” and R-”
ensuring that the R+” is connected to the “+ terminal on your loudspeaker
and the “R- is connected to the loudspeakers “- terminal. Connect the
terminals marked “L+” and “L-” to the left speaker in the same way.
In Bridge Mode, connect the single speaker to the terminals marked “R +”
and “L+” ensuring that the “L+ is connected to the “+” terminal on your
loudspeaker and the “R+” is connected to the loudspeaker’s “-” terminal.
2 BRIDGE MODE (applicable to CHANNEL B only): Set the BRIDGE
MODE switch to the “ON” position and connect the speaker to the
terminals marked “L +” and “R+” ensuring that the “L+” is connected to
the “+” terminal of your loudspeaker and the “R+” is connected to the
loudspeakers “ - ” terminal. Connect the input source to the CHANNEL
B IN sockets.
3 CHANNEL B (IN/OUT): Connect the output from a pre-amplier or
processor, such as a surround-sound decoder, to this set of CHANNEL
B IN sockets. Use a twin RCA-to-RCA lead to connect the left and right
Audio Output” of the preamplier or processor to these CHANNEL B
input sockets.
CHANNEL B OUT is line level “loop through” output. The same level of
input signal at the CHANNEL B IN sockets is available at CHANNEL B
OUT sockets thereby allowing the same signal to be shared or passed
on to another amplier.
Always turn OFF the C 245BEE and other components in the system
before connecting or disconnecting anything to the CHANNEL B IN
sockets.
4 CHANNEL A (IN/OUT): Connect the output from a pre-amplier or
processor, such as a surround-sound decoder, to this set of CHANNEL
A IN sockets. Use a twin RCA-to-RCA lead to connect the left and right
Audio Output” of the preamplier or processor to these CHANNEL A
input sockets.
CHANNEL A OUT is a line level “loop through” output. The same level
of input signal at the CHANNEL A IN sockets is available at CHANNEL A
OUT sockets thereby allowing the same signal to be shared or passed
on to another amplier.
Always turn OFF the C 245BEE and other components in the system
before connecting or disconnecting anything to the CHANNEL A IN
sockets.
5 BRIDGE MODE (applicable to CHANNEL A only): The C 245BEE
amplier can be congured to be MONO (Bridge Mode), more than
doubling its output power. This way, the C 245BEE can be used as
part of a high power stereo or home-theatre system, by connecting
additional power ampliers.
In BRIDGED MODE, the C 245BEE will produce approximately 70W into
an 8 ohm loudspeaker. In this mode, the amplier sections will react
as though the speaker impedance has been halved. Low impedance
speakers (under 8 ohms) are not recommended when using Bridge
Mode as these may cause the ampliers thermal cut-out to operate if
played at high levels.
Set the BRIDGE MODE switch to the “ON” position and connect the
speaker to the terminals marked “L +” and “R+” ensuring that the “L+”
is connected to the “+” terminal of your loudspeaker and the “R+” is
connected to the loudspeakers “ - ” terminal. Connect the input source
to the CHANNEL A IN sockets.
NOTE
Do not connect anything to the Right Input socket when Bridge Mode is
selected.
IDENTIFICATION OF CONTROLS
REAR PANEL
1 2 5 6 7 8 9
3 4
ATTENTION!
Please make sure that the C 245BEE is powered OFF or unplugged before making any connections. It is also advisable to power-down or unplug all
associated components while making or breaking any signal or AC power connections.
1110
7
ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD C 245 BEE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD C 245 BEE in the language / languages: English as an attachment in your email.

The manual is 0,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD C 245 BEE

NAD C 245 BEE User Manual - German - 12 pages

NAD C 245 BEE User Manual - Dutch - 12 pages

NAD C 245 BEE User Manual - French - 12 pages

NAD C 245 BEE User Manual - Italian - 12 pages

NAD C 245 BEE User Manual - Swedish - 12 pages

NAD C 245 BEE User Manual - Spanish - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info