118720

Myguide 3100 Manual

105
Zoom out
Zoom in
Previous page
1/108
Next page
105
GLOSSARY AND INDEX
(Explanation of the most important technical terms)
2D/3D GPS tracking:
The GPS receiver uses satellite signals to track its (your) position. Depending on the current
position of the orbiting satellites in the sky and the objects located around you, the received
signal will be strong or weak. Your GPS unit requires strong signals from at least four satellites
to be able to calculate your position in three dimensions (including elevation). When only three
satellites are visible, position tracking is still possible, but the accuracy will be lower and no
elevation can be determined. This is called 2D tracking. The signal quality is shown in the
Navigation Main menu, the GPS data display and the two map displays of the navigation
device. 2D or 3D tracking does not influence the map display modes. The display mode is a way
to represent maps that does not depend on the GPS reception.
Accuracy at current position:
The difference between your real position and the position determined by GPS is affected by
several factors. You GPS receiver can estimate the error based on the number and position of
the satellites emitting the signals. This information is displayed on the GPS data display of your
device. A smaller value indicates a higher accuracy. An accuracy of 1.0 is the optimum. This will
be the reference value. Please note that the GPS accuracy depends on some additional factors
that cannot be corrected by your GPS receiver (signal delay through ionospheric effects,
reflective materials next to the GPS device, etc.).
Active route:
This route is an itinerary planned to reach the desired destinations. A route is called active when
used for navigation. Thus, the program will only have one single navigation route that will
remain active until you delete it, you reach your destination or you exit the program. If you want
to go to more than one destination, the route will be segmented (from one waypoint to the next
waypoint). Only one of these route segments can be active at any one time. The other
segments will remain inactive and are represented by a different colour on the map.
Automatic day and night colours:
MyGuide can calculate sunrise and sunset based on the local time and geographic coordinates.
Based on this information, the system will toggle from daylight to night colours a few minutes
after sunset and back to daylight colours prior to sunrise.
To improve the orientation, the 3D map view will also show the sun's position in the sky when
selecting a lower virtual height.
Automatic route planning:
(Autorouting): You simply need to specify your destination and the program will determine the
most suitable roads and road intersections to reach it, based on the built-in maps. MyGuide
offers different possibilities to select the destination as well as several route planning
parameters.
… 105 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Myguide 3100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Myguide 3100 in the language / languages: English as an attachment in your email.

The manual is 3,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Myguide 3100

Myguide 3100 User Manual - German - 112 pages

Myguide 3100 User Manual - Danish - 112 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info