493680

Mvision STX-5 USB Manual

5
Zoom out
Zoom in
Previous page
1/153
Next page
7
GENERAL INFORMATION
IV. FRONT PANEL
“All USB 2.0 flash drive may not be compatible with the product”
1. POWER Switches the receiver power On and Standby.
2. CH Up/Down Channel up / down or selects the item of Menu.
3. VOL Up/Down Volume up/down or selects the item of Menu.
4. USB PORT Connects to USB device.
5. USB PORT DivX file play.
①②③⑤④
6
GENERAL INFORMATION
III. REMOTE CONTROL UNIT (RCU)
Setting Method
1. 3 digits Setting Method
1) Turn of the TV
2) Press the “TV” Key and “OK” at the same time for more than 2 seconds. Then the TV LED will turn
on/off 2 times.
3) Refer the TV Brand List and Press the three numbers. (TV LED will turn on/off 2 times. If the three
numbers is wrong, TV LED turn on/off 1 time)
4) If there are a few pf fixed numbers in the Brand, repeat the step, until the TV turns off.
5) If the TV turns off, press the “OK” Keay. (If the setting is done properly. the LED of the RCU will turn
on/off 2 times)
6) Check if the POWER and other buttons of the RCU are working properly.
7) If the POWER button works but the other buttons does not work, start again from the stop 1) (In some
Brands, other buttons except POWER can not work properly)
� For VCR & DVD, same procedure as above.
∙If you don’t press three numbers within 10 seconds, setting will be failed.
∙If you can not find the fixed number with the above method.
2. Auto Search Method
1) Turn on the TV
2) Press the “TV” key and “OK” at the same time for more than 2 seconds. Then, the TV LED will turn
on/off 2 times.
3) Press the “UP” key until the TV turns off (If you want to search from the reverse, press the “DOWN” key)
4) If the TV turns off, press the “OK”key.
(If the setting is done properly. the LED of the RCU will turn on/off 2 times)
5) Check if the POWER and other buttons of the RCU are working properly.
6) If the POWER button works but the other buttons does not work, start again from the procedure 1)
(In some Brands, ther buttons except POWER can not work properly)
� For VCR & DVD, same procedure as above
∙If you don’t press three numbers within 10 seconds, setting will be failed.
3. How to check current setting number
1) Press the “TV” key and “OK” at the same time for more than 2 seconds. Then, the TV LED will turn
on/off 2 times.
2) Press the “info” key within 3 seconds.
3) TV LED blinks to show the current setting number in order. (TV LED blinks 10 times to show ‘o’
Ex) If the current setting number is 350, the TV LED blinks 3 times, 5 times and 10 times
� For VCR & DVD, same procedure as above.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mvision STX-5 USB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mvision STX-5 USB in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 6,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info