655756
1
Zoom out
Zoom in
Previous page
1/2
Next page
FR
Manuel de l’utilisateur
GB
User Manual
PT
Manual do Utilizador
Benutzerhandbuch
DE
ES
Manual de instrucciones
Manuale di istruzioni
IT
NL
Handleiding
FR
Lire attentivement les instructions avant de faire
fonctionner l’appareil.
GB
Please read the instruction carefully before
operating the unit.
PT
Leia este manual com atenção antes de qualquer
utilização.
Bitte lesen sie dieses handbuch vor dem gebrauch
des gerätes sorgfältig durch.
DE
ES
Antes de utilizar este aparato, lea atentamente las
siguientes instrucciones
Leggere attentamente questo manuale prima di
utilizzare l’apparecchio.
IT
NL
Lees deze handleiding aandachtig voor u het
toestel gebruikt.
M-710 BT / BTW
1. Marquage NFC
2. Indicateur de fonction LED
(bleu pour le mode Bluetooth,
vert pour le mode entrée
auxiliaire, rouge pour le
chargement)
3. Veille / Marche
4. Lecture/Pause
5. Accepter un appel /
transférer un appel / rappeler
un numéro / terminer un appel
Ce lecteur est équipé d’une batterie ion-lithium rechargeable intégrée.
Chargez la batterie pendant au moins quatre heures avant d'utiliser
l'appareil pour la première fois.
L'indicateur LED de fonction passera à la couleur rouge pendant le
chargement et s'éteindra une fois le chargement terminé.
Dans le souci d'économiser l'énergie, lorsque la lecture a atteint la n
ou que le volume d'écoute est réglé à un niveau très bas et qu'aucune
commande n'est effectuée sur l'appareil pendant une période de 15
minutes, l'unité s'éteindra automatiquement.
Avertissements:
Lors de l’utilisation de la batterie intégrée, la température ambiante doit
être comprise entre 5°C et 35°C.
An d’allonger la durée de vie de la batterie intégrée, veuillez la
recharger à une température d’intérieur.
La batterie intégrée de cet appareil peut présenter un risque d’incendie
ou de brûlure chimique en cas d’utilisation incorrecte. Ne démontez
pas la batterie, ne la chauffez pas à plus de 100°C et ne la jetez pas
au feu.
N’exposez pas la batterie à une chaleur excessive, comme les rayons
du soleil, le feu ou d’autres sources de chaleur similaires.
Veillez au respect de l’environnement lorsque vous vous débarrassez
des piles.
• Ne jetez pas les piles au feu !
N’exposez pas les piles à une chaleur excessive, comme les rayons
du soleil, le feu ou d’autres sources de chaleur similaires.
Lorsque la batterie est faible, vous entendrez une voix « Battery
low » (batterie faible) toutes les 30 secondes. L'unité passera
automatiquement en mode veille lorsque la batterie sera trop faible
pour fonctionner.
ATTENTION: Risque d’explosion si les piles ne sont pas insérées
correctement. Utilisez uniquement des piles identiques ou de type
équivalent.
Allumer / éteindre l'unité
Appuyez longuement sur pour allumer l'unité. Vous entendrez la voix
«Power on» (allumage).
Appuyez longuement sur de nouveau pour éteindre l'unité. Vous
entendrez la voix «Power off» (extinction).
Le mot Bluetooth
®
ainsi que les marques et logo sont des marques
commerciale déposées détenues par Bluetooth SIG, Inc. et l'utilisation
de ces marques par New One S.A.S se fait dans le cadre d'une
autorisation. Les autres marques et noms commerciaux sont les
propriétés deleurs titulaires respectifs.
Coupler un appareil Bluetooth
Appuyez longuement sur pour allumer l'unité. L'indicateur de fonction
LED clignotera en bleu pour indiquer qu'il est en mode couplage.
Sur l'appareil Bluetooth, activez le Bluetooth et sélectionnez
«M-710 BT» dans la liste des appareils. (consultez le manuel
d'instruction de l'appareil pour les détails de connexion). Si l'appareil
Bluetooth vous demande un mot de passe, utilisez '0000'. Certains
appareils Bluetooth vous demanderont d'accepter la connexion. Si les
unité sont couplées correctement, vous entendrez la voix «Connected»
(Connecté).
Astuce: Si vous souhaitez connecter votre enceinte Bluetooth à
un autre appareil Bluetooth, vous devez déconnecter l'appareil
actuellement connecter avant de pouvoir suivre les étapes ci-dessus
pour établir une nouvelle connexion.
Sur certains appareils, comme les ordinateurs, une fois couplé,
vous devrez sélectionner l'unité dans le menu Bluetooth et choisir
«utiliser comme un dispositif audio (Stéréo)» ou une phrase similaire.
Le couplage reste intact lorsque l’unité et/ou l’appareil Bluetooth sont
amenées hors de la portée de liaison. Une connexion active sera
rétablie lorsque votre appareil Bluetooth reviendra dans la portée.
Lorsque vous rallumez l'unité, elle essayera automatiquement de
reconnecter avec le dernier appareil Bluetooth connecté.
Utiliser un appareil Bluetooth
1. Avec une unité couplée, (voir la section précédente), faites
fonctionner votre appareil Bluetooth et il diffusera du son par le biais
de l'enceinte M-710 BT.
2. Appuyez sur la touche pour mettre la lecture en pause. Touchez à
nouveau pour reprendre la lecture.
3. Tenez les touches / appuyées pour régler le volume de son.
Vous pouvez également régler le volume sur l'appareil sur lequel
vous êtes couplé.
4. Appuyez brièvement sur les touches / pour choisir le chier
audio de votre choix.
Remarque: L'indicateur Bluetooth s'allumera en bleu continu pendant
la lecture.
Utiliser un appareil NFC
NFC (Near Field Communication) est une technologie qui permet
la communication sans l de courte portée entre des appareils
compatibles NFC, comme les téléphones portables.
1. Appuyez longuement sur pour allumer l'unité. L'indicateur de
fonction LED clignotera en bleu pour indiquer qu'il est en mode
couplage.
2. Activez le NFC et le Bluetooth sur vos appareils Bluetooth (consulter
le manuel d'utilisation de votre appareil pour plus de détails), touchez
l'appareil NFC sur le marquage NFC de cette unité. Si les unité
sont couplées correctement, vous entendrez la voix «Connected»
(Connecté). L'appareil NFC est connecté à cette unité via Bluetooth.
3. Choisissez et lisez un chier audio ou musical sur votre appareil
NFC.
4. Pour interrompre la connexion, touchez l'appareil NFC sur le
marquage NFC de cette unité à nouveau.
Remarque:
La portée opérationnelle entre l'unité principale et un appareil NFC est
environ de 10 mètres.
6. : Pression longue pour
diminuer le volume, pression
courte pour passer à la piste
précédente
7. : Pression longue pour
augmenter le volume,
pression courte pour passer
à la piste suivante
8. Microphone
9. Haut-parleurs
10. Prise micro-USB pour le
chargement
11. Entrée auxiliaire (AUX IN)
EMPLACEMENT ET DESCRIPTION DES COMMANDES
ALIMENTATION
UTILISATION
ENCEINTE PORTABLE BLUETOOTH RESISTANTE AUX
PROJECTIONS D’EAU
FR
1. Tenez la touche appuyée pour allumer l'unité.
2. Connectez votre source auxiliaire (ex: lecteur mp3) sur la prise
AUX IN de l'unité (câble non fourni). L'unité passera automatiquement
en mode d'entrée auxiliaire. L'indicateur LED de fonction passera au
vert, indiquant qu'il s'agit du mode AUX.
3. Commencez la lecture de l'unité externe et le son émis par l'unité
externe sera diffusé par les enceintes du M-710 BT.
4. Ajustez le volume sonore au niveau désiré.
5. Pour arrêter la lecture, déconnectez le câble audio de la prise
d'entrée auxiliaire. l'unité passera automatiquement en mode
Bluetooth.
En cas de problème avec cette unité, vériez ce qui suit avant de
demander une réparation:
Pas de courant
L'appareil n'est pas allumé, appuyez longuement sur pour allumer
l'unité.
Assurez-vous que l'unité soit chargée.
Pas de son - général
Le volume de l'appareil externe est réglé au minimum, augmentez
le volume.
Le volume du M-710 BT est réglé au minimum, augmentez le volume.
Le câble audio est branché, débranchez le câble si vous n'utilisez pas
la fonction d'entrée auxiliaire.
L'appareil Bluetooth ne peut pas se coupler ou se connecter à
l'unité.
Vous n'avez pas activé la fonction Bluetooth de votre appareil.
Consultez le manuel d'utilisation de votre appareil pour activer la
fonction Bluetooth.
L'unité est déjà connectée à un autre appareil Bluetooth; déconnectez
cet appareil et réessayez.
PILES RECHARGEABLES
Type de batterie: Batterie ion-Lithium 3,7V 2200mAh
Tension de chargement: 5V CC 500mA
Durée de fonctionnement: Environ 8 heures à 50% du volume après
chargement complet
Temps de chargement: Environ 3,5 heures
BLUETOOTH
Version Bluetooth: V2,1+ EDR
Bluetooth: 2.402-2.48GHz
Puissance de sortie des RF (fréquences radios): -3.838 dBm
Distance de fonctionnement: Jusqu'à 10 mètres mesurés en espace
ouvert (les murs et les structures peuvent affecter la portée de
l'appareil).
Les caractéristiques et les spécications sont sujettes à modication
sans préavis.
ATTENTION: Pour réduire le risque de choc
électrique, ne démontez pas l’appareil. Aucune
pièce interne n’est réparable par l’utilisateur.
Conez tout entretien à un technicien qualié.
Le symbole de l'éclair terminé par une èche à l'intérieur d'un
triangle avertit l'utilisateur de la présence d’une « tension
dangereuse » dans l'appareil.
Le point d’exclamation situé à l’intérieur d’un triangle avertit
l’utilisateur de la présence d’instructions importantes dans la
documentation accompagnant l’appareil.
AVERTISSEMENT:
Veillez à assurer une ventilation sufsante et ne couvrez pas les orices
de ventilation de l'appareil.
• Ne placez pas de bougie sur ou à proximité de l'appareil.
• Utilisez cet appareil dans des climats tempérés.
• Veillez à ne pas exposer votre appareil aux éclaboussures.
Prévoyez un espace de 5 cm minimum autour de l’appareil pour assurer
une ventilation sufsante.
Ne placez pas de récipient rempli de liquide, tel qu’un vase, sur l’appareil.
• La plaque signalétique se trouve au dessous de l'appareil.
Sous l'effet de phénomènes électriques transitoires et / ou électrosta-
tiques, le produit peut présenter des dysfonctionnements et une
réinitialisation peut s'avérer nécessaire.
Si à l’avenir vous désirez vous débarrasser de cet appareil,
veuillez noter que les appareils électriques ne doivent
pas être jetés avec les ordures ménagères. Renseignez-
vous pour connaître le centre de recyclage le plus proche.
Consultez les autorités locales ou votre revendeur pour
plus de détails (directive sur les déchets des équipements
électriques et électroniques).
Recevoir un appel / passer un appel
Cette unité est équipée d'un microphone intégré(situé en haut de
l'unité), qui vous permet de passer ou terminer des appels d'un
téléphone portable connecté sur cette unité. Assurez-vous que votre
téléphone avec le Bluetooth activé soit connecté sur l'unité. Lorsque
vous recevez un appel sur le téléphone portable, vous entendrez une
tonalité d'appel d'appel entrant sur l'unité.
1. Appuyez sur la touche pour répondre à l'appel entrant.
2. Appuyez sur la touche de nouveau pour terminer l'appel.
3. Pour rejeter l'appel entrant, tenez la touche appuyée.
4. Pour transférer un appel entre le téléphone portable et l'unité, tenez
la touche appuyée pendant un appel.
5. Pour appeler le dernier numéro composé dans la mémoire du
téléphone portable, appuyez sur la touche deux fois.
Remarque:
La fonction rappel n’est pas disponible s’il n’y a pas de fonction
d'enregistrement des appels sur votre téléphone portable.
Ce système ne fonctionnera pas ou risque de mal fonctionner avec
certains téléphones portables / lecteurs audio Bluetooth.
Si la conversation n'est pas claire, essayez de vous rapprocher du
microphone (situé en haut de l'unité).
Par la présente, NEW ONE S.A.S déclare que l'appareil "MUSE
M-710 BT / M-710 BTW" est conforme aux exigences essentielles
et autres dispositions pertinentes de la directive 1999/5/CE. La
déclaration de conformité peut être consultée sur le site http://www.
muse-europe.com/conformity/M-710BT.pdf
CONNEXION D'UNE SOURCE AUXILIAIRE
RÉSOLUTION DES PROBLÈMES
SPÉCIFICATIONS
CONSIGNES DE SECURITE
NEW ONE S.A.S
10, Rue de la Mission, 25480 Ecole Valentin, France
Nos emballages peuvent faire l’objet d’une consigne de tri,
pour en savoir plus: www.quefairedemesdechets.fr
1. NFC tag
2. Function LED indicator (blue
for Bluetooth mode, green
for AUX IN mode, red for
charging)
3. Power ON/OFF
4. Play/Pause Button
5. Receive call/ Transfer call/
Redial call/ End call
The unit is powered by a built-in, lithium-ion rechargeable battery.
Charge the built-in battery for at least four hours before using the device
for the rst time.
To charge the internal battery, connect the smaller end of the supplied
USB cable to the Micro USB jack and the other end to a powered USB
jack on your computer or an AC power supply (not included).
The function LED indicator will change to red color during charging and
light off when the battery becomes fully charged.
In a concern of saving energy, when playback has reached to the end or
listening volume is set at a very low level and no control is operated on
the device for a period of 15 minutes, the unit will turn off automatically.
Warnings:
While using the built-in battery, the environmental temperature should
be 5°C (41°F) to 35°C (95°F).
The built-in battery in this device may present a risk of re or chemical
burn if mistreated. Do not disassemble, heat above 100°C (212°F),
or incinerate.
To get the longest service life of the built-in battery, charge at indoor-
temperature.
Attention should be drawn to the environmental aspects of battery
disposal.
• Do not throw batteries in re!
Battery shall not be exposed to excessive heat such as sunshine,
re or the like.
When the battery is low, you will hear the voice “Battery low” every 30
seconds. The unit will switch to standby mode automatically when the
battery is too low to work.
CAUTION: Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Turning unit ON/OFF
Long press to turn ON the unit. You will hear the voice “Power ON”.
Long press again to turn OFF the unit. You will hear the voice
“ Power OFF ”.
The Bluetooth
®
word mark and logos are registered trademarks owned
by Bluetooth SIG, Inc. and any use of such marks by New One S.A.S
is under license. Other trademarks and trade names are those of their
respective owners.
Pairing a Bluetooth Device
Long press to turn ON the unit. The function LED indicator will blink
blue indicating it’s in pairing mode. On the Bluetooth device, enable
Bluetooth and select “M-710 BT” from the Device List.(Refer to the user
manual of the device to be connected for detailed operations.) If the
Bluetooth device prompts for a passcode, use “0000”. Some Bluetooth
devices will ask you to accept the connection. If the units are paired
properly, you will hear the voice “Connected”.
Tip: If you want to connect your Bluetooth speaker to another Bluetooth
audio device, you need to disconnect current device rst and follow the
steps above to make a new connection.
On some devices such as computers, once paired you must select
the unit from the Bluetooth menu and choose “Use as Audio Device
(stereo)” or similar.
Pairing remains intact when the unit and/or your Bluetooth device is
taken out of communication range. An active connection will be re-
established when your Bluetooth device returns within range.
When the unit is turned on again, it will automatically try to reconnect
with the most recently paired Bluetooth device.
Using a Bluetooth Device
1. With a unit paired (see previous section), operate your Bluetooth
device and its sound will be heard through the M-710 BT’s speakers.
2. Press the button to pause playback. Press again to resume
playback.
3. Long press / buttons to adjust the volume level. You can also
adjust the volume on the device to which you are paired.
4. Short press / buttons to select your desired audio le.
Note: The Bluetooth indicator will light solid blue during playback.
Using a NFC Device
NFC (Near Field Communication) is a technology that enables short-
range wireless communication between NFC-enabled devices, such as
mobile phones.
1. Long press to turn ON the unit. The function LED indicator will
blink blue indicating it’s in pairing mode.
2. Enable NFC and Bluetooth on your Bluetooth device (see the user
manual of your device for details), tap the NFC device on the NFC
tag of this unit. If the units are paired properly, you will hear
the voice “Connected”. The NFC device is connected to this unit via
Bluetooth.
3. Select and play audio les or music on your NFC device.
4. To break the connection, tap the NFC device with the NFC tag
on this unit again.
Note:
The operational range between the main unit and a NFC device is
approximately 10 meters.
Receiving/Dialing a Phone Call
This unit is equipped with a built-in microphone (located on top of the
unit), which allows you to make or end calls of a connected mobile
phone through this unit. Make sure your Bluetooth-enabled mobile
phone is paired with the unit. When there is an incoming call to the
connected mobile phone, you will hear an incoming call alert tone from
the unit.
1. Press the button to answer the incoming call.
2. Press the button again to end call.
3. To reject the incoming call, press and hold the button.
4. To transfer the sound between the mobile phone and the unit, press
and hold the button during a call.
5. To redial the last number retained in the memory of the mobile
phone, press the button twice.
Notes:
Re-dialing function is unavailable if there is no dial record feature in
your mobile phone.
This unit will not operate or may operate improperly with some
Bluetooth mobile phones/audio players.
If the conversation is not clear, try to move closer to the microphone
(located on top of the unit).
Hereby, NEW ONE S.A.S, declares that this MUSE M-710 BT /
M-710 BTW is in compliance with the essential requirements and
other relevant provisions of Directive 1999/5/EC. The declaration of
conformity may be consulted at http://www.muse-europe.com/
conformity/M-710BT.pdf
6. : Long press to decrease
the volume; short press to
skip to previous track
7. : Long press to increase
the volume; short press to
skip to next track
8. Microphone
9. Speakers
10. Micro USB jack for charging
11. AUX IN jack
LOCATION OF CONTROLS
POWER SUPPLY
OPERATION
SPLASH PROOF PORTABLE BLUETOOTH SPEAKER
GB
1. Long press to turn ON the unit.
2. Connect your auxiliary source (e. g. mp3 player) to the AUX IN
jack on unit (cable not included). The unit will switch to AUX mode
automatically. The function LED indicator will change to green,
indicating it’s in AUX mode.
3. Start playback of the external unit and the external audio unit’s
output sound will be heard through the M-710 BT’s speakers.
4. Adjust the volume to desired level.
5. To stop playback, disconnect the audio cable from the AUX IN jack.
The unit will switch to Bluetooth mode automatically.
Should this unit exhibit a problem, check the following before seeking
service:
No Power
• Power is not on; Long press to turn ON the unit.
• Make sure the battery is recharged.
No Sound – General
• External device’s volume is set to minimum; raise volume.
• The M-710 BT’s volume is set to minimum; raise volume.
The audio cable is plugged in. Unplug cable if not using AUX IN
function.
The Bluetooth device cannot pair or connect with the unit.
You have not activated the Bluetooth function of your device. Refer
to the user manual of your device to activate Bluetooth function.
The unit is already connected with another Bluetooth device;
disconnect that device and then try again.
RECHARGEABLE BATTERY
Battery Type: 3.7V 2200mAh Lithium -ion Battery
Charging voltage: DC 5V 500mA
Operating Time: Approx. 8 hours at 50% volume after fully charged
Charging Time: Approx. 3.5 hours
BLUETOOTH
Bluetooth Version: V2.1+ EDR
Bluetooth: 2.402-2.48GHz
RF Output Power: -3.838 dBm
Working Distance: Up to 10 meters measured in open space (wall and
structures may affect range of device)
Specications are subject to change without notice.
CAUTION: To reduce the risk of electric shock,
do not remove the cover (or back). There are no
user serviceable parts inside the unit. Refer all
servicing to qualify personnel.
The lightening ash with arrowhead symbol within the
triangle is a warning sign alerting the user of “dangerous
voltage” inside the unit.
The exclamation point within the triangle is a warning sign
alerting the user of important instructions accompanying the
product.
WARNING!
The ventilation should not be impeded by covering the ventilation
openings with items such as newspapers, table-cloths, curtains, etc.
No naked ame sources, such as lighted candles, should be placed
on the apparatus.
The use of apparatus in moderate climates.
The apparatus should not be exposed to dripping or splashing.
Ensure a minimum distance of 5cm around the apparatus for
sufcient ventilation.
Do not place objects lled with liquids, such as vases, on the
apparatus.
The marking plate is located on bottom of the device.
Under the inuence of electrical fast transient or/and electrostatic
phenomenon, the product may malfunction and require user to
power reset.
If at any time in the future you should need to dispose of this
product please note that Waste electrical products should
not be disposed of with household waste. Please recycle
where facilities exist. Check with your Local Authority
or retailer for recycling advice. (Waste Electrical and
Electronic Equipment Directive)
CONNECTING AUXILIARY SOURCE
TROUBLESHOOTING GUIDE
SPECIFICATIONS
SAFETY INSTURCTIONS
NEW ONE S.A.S
10, Rue de la Mission, 25480 Ecole Valentin, France
1. Símbolo do NFC
2. Indicador de Função LED
(azul para modo Bluetooth,
verde para modo AUX IN,
vermelho para carregar)
3. Ligar/Desligar
4. Reproduzir/Pausar
5. Receber chamadas
/ Transferir chamadas/
Rediscar chamadas /
Terminar chamadas
O aparelho vem equipado com uma bateria recarregável de íões de
lítio. Recarregue a bateria por pelo menos quatro horas antes de usar o
aparelho pela primeira vez.
Para recarregar a bateria interna, conecte a menor ponta do cabo USB
que acompanha o produto no conector Micro USB e a outra ponta em
um conector USB energizado no seu computador ou em uma fonte de
tomada (não fornecida).
O indicador de função LED muda para a cor vermelha durante o
carregamento e desliga quando a bateria ca completamente carregada.
Para poupar energia, quando a reprodução chega ao m, ou o volume
de som é ajustado para um nível muito baixo e não é operado qualquer
controlo no dispositivo por um período de 15 minutos, a unidade será
desligada automaticamente.
Avisos:
Enquanto utiliza a bateria integrada, a temperatura ambiental deverá
ser entre 5°C (41°F) e 35°C (95°F).
Para obter a maior duração possível da bateria integrada, carregue a
temperaturas de interior.
A bateria integrada deste dispositivo pode apresentar risco de fogo ou
queimaduras químicas se não for devidamente manuseada. Não a
desmonte, não a exponha a temperaturas superiores a 100°C (212°F)
e não a incinere.
Cumpra as regras ambientais relativamente à disposição de pilhas
usadas.
• Não atire pilhas para o fogo!
Não exponha as pilhas a um calor excessivo, como por exemplos aos
raios solares, ao fogo e a outras fontes de calor similares.
Quando a bateria está fraca, ouvir-se-á a voz Battery low ” (Bateria
fraca) de 30 em 30 segundos. O aparelho entrará no modo de espera
automaticamente quando a bateria estiver muito fraca.
ATENÇÃO: Riscos de explosão se as pilhas não forem inseridas
correctamente. Utilize apenas pilhas idênticas ou de tipo
equivalente.
LIGAR/DESLIGAR [ON/OFF] a unidade
Prima longamente para LIGAR a unidade. Ouvirá uma voz a dizer
“Power On” ( A LIGAR).
Prima longamente de novo para desligar a unidade. Ouvirá uma voz a
dizer “ Power off ” ( A DESLIGAR).
O nome Bluetooth
®
e logotipos são marcas registradas de propriedade
da Bluetooth SIG, Inc. e quaisquer usos destas marcas pela New One
S.A.S estão licenciados. Outras marcas e nomes registrados pertencem
aos seus respectivos proprietários.
Pareando um dispositivo com Bluetooth
Prima longamente para LIGAR a unidade. O indicador de função LED
pisca a azul indicando que se encontra em modo emparelhamento. No
dispositivo com Bluetooth, ative o Bluetooth e selecione "M-710 BT"
na Lista de Dispositivos. (Consulte o manual de instruções do
dispositivo que estiver sendo conectado para mais detalhes). Caso
o dispositivo com bluetooth solicite uma senha, utilize "0000".
Alguns dispositivos com Bluetooth solicitarão que você aceite a
conexão. Caso os aparelhos tenham sido pareados corretamente,
a caixa de som emitirá dois alertas sonoros. Se as unidades
estiverem adequadamente emparelhadas, ouvirá a voz “Connected”
(Ligado).
Dica: Caso você queira conectar a sua caixa de som Bluetooth a outro
dispositivo com Bluetooth, você precisará desconectar o dispositivo
atualmente conectado primeiro, e então seguir os passos acima para
realizar a nova conexão.
Em alguns dispositivos, como computadores, uma vez pareado, você
precisará selecionar o aparelho em um Menu Bluetooth e escolher
"Utilizar como Dispositivo de Áudio (estéreo)" ou semelhante.
O pareamento permanecerá intacto quando o aparelho ou o seu
dispositivo com Bluetooth for retirado da área de comunicação. Uma
conexão ativa será restabelecida quando o dispositivo com Bluetooth
voltar à área de alcance.
Quando o aparelho for ligado novamente, ele tentará automaticamente
se reconectar ao dispositivo de Bluetooth com o qual ele tenha sido
mais recentemente pareado.
Utilizando um dispositivo com Bluetooth
1. Com o aparelho pareado (veja seção anterior), utilize o seu dispositivo
com Bluetooth e o seu som poderá ser escutado através das caixas
de som do M-710 BT.
2. Pressione o botão para pausar uma reprodução. Pressione
novamente para continuar uma reprodução.
3. Pressão longa nos botões / para ajustar o nível do volume. Você
também poderá ajustar o volume através do dispositivo com o qual
você estiver pareado.
4. Pressão curta nos botões / para seleccionar o cheiro áudio
desejado.
Observação: O indicador de Bluetooth cará estático em azul durante
a reprodução.
Utilizando um dispositivo com NFC
NFC (Comunicação em campo curto) é uma tecnologia que permite
comunicações sem-o em curta distância entre dispositivos que portem
NFC, como telefones móveis.
1. Prima longamente para LIGAR a unidade. O indicador de função LED
pisca a azul indicando que se encontra em modo emparelhamento.
2. Ative o NFC e o Bluetooth em seu dispositivo com Bluetooth (consulte
o manual de instruções do dispositivo para mais detalhes), encoste
o NFC do dispositivo no símbolo do NFC desse aparelho. Se
as unidades estiverem adequadamente emparelhadas, ouvirá a voz
“Connected“ (Ligado). O dispositivo com NFC será conectado a esse
aparelho através do Bluetooth.
3. Selecione e reproduza arquivos de áudio e música no seu dispositivo
com NFC.
4. Para desfazer a conexão, toque o dispositivo com NFC no símbolo
NFC nesse aparelho novamente.
6. : Premir longamente para
baixar o volume; premir
ligeiramente para saltar para
a faixa anterior
7. : Premir longamente para
aumentar o volume; premir
ligeiramente para saltar para
a faixa seguinte
8. Microfone
9. Altifalantes
10. Conector Micro USB para
recarga
11. Tomada de entrada Aux
DESCRIÇÃO DO APARELHO
ALIMENTAÇÃO
UTILIZAÇÃO
CAIXAS DE SOM BLUETOOTH RESISTENTE A ÁGUA
PT
Observação:
A distância de utilização entre o aparelho principal e um dispositivo
com NFC é de aproximadamente 10 metros.
Recebendo/Realizando uma Chamada de Telefone
Este aparelho vem equipado com um microfone interno (localizado no
topo da unidade), o que lhe permite realizar ou terminar chamadas de
um dispositivo móvel conectado por este aparelho. Certique-se de
que o seu telefone com Bluetooth esteja pareado com este aparelho.
Quando uma chamada estiver sendo recebida no telefone conectado,
você escutará o tom de alerta através das caixas de som.
1. Pressione o botão para atender a chamada que estiver sendo
recebida.
2. Pressione o botão novamente para terminar a chamada.
3. Para rejeitar uma chamada, mantenha o botão pressionado.
4. Para transferir o som de uma chamada entre o telefone móvel e o
aparelho, mantenha o botão pressionado durante uma chamada.
5. Para re-discar o último número guardado na memória do seu
telefone móvel, pressione o botão duas vezes.
Observação:
A função de re-discagem não estará disponível caso não exista a
função de registro de chamadas no seu telefone móvel.
Este aparelho não funcionará ou funcionará de forma incorreta
em alguns telefones móveis e aparelhos de áudio equipados com
Bluetooth.
Caso a qualidade de conversa não esteja clara, tente se aproximar do
microfone (localizado no topo da unidade).
Hierbij verklaart NEW ONE S.A.S dat deze MUSE M-710 BT/
M-710 BTW voldoet aan de essentiële eisen en andere relevante
bepalingen uit richtlijn 1999/5/EC. De verklaring van confor-miteit kan
worden geraadpleegd op http://www.muse-europe.com/conformity/
M-710BT.pdf
1. Prima longamente para LIGAR a unidade.
2. Ligue a fonte auxiliar (por ex mp3 player) à entrada AUX IN da
unidade (cabo não incluído). A unidade muda para o modo AUX
automaticamente. O indicador de função LED muda para verde,
indicando que se encontra em modo AUX IN.
3. Inicie a reprodução do aparelho externo e o som gerado pelo
aparelho de som externo será escutado através das caixas de som
do M-710 BT.
4. Ajuste o volume sonoro para o nível pretendido.
5. Para interromper a reprodução, desconecte o Fio de Entrada do
conector do Fio de Entrada; o aparelho trocará para o modo de
Bluetooth automaticamente.
Caso este aparelho apresente um problema, verique as seguintes
soluções antes de contactar um técnico:
Não funciona
Com o aparelho desligado; Prima longamente para LIGAR a
unidade.
• Certique-se de que a bateria está recarregada.
Sem som - Geral
O nível de volume do dispositivo externo está no mínimo; aumente
o volume.
• O nível de volume to M-710 BT está no mínimo; aumente o volume.
Um o de áudio está conectado. Desconecte o o caso a função Fio
de Entrada não esteja sendo utilizada.
O dispositivo Bluetooth não consegue parear ou conectar ao
aparelho.
Você não ativou a função de Bluetooth do seu dispositivo. Consulte
o manual de instruções do seu dispositivo para ativar a função de
Bluetooth.
O aparelho está conectado a outro dispositivo com Bluetooth;
desconecte esse dispositivo e tente novamente.
BATERIA RECARREGÁVEL
Tipo de Bateria: Bateria de Iões de Lítio 3.7V 2200mAh
Tensão de Carga: 5V DC 500mA
Tempo de Funcionamento: Aprox. 8 horas com o volume em 50%
depois de uma recarga completa.
Tempo de recarga: Aprox. 3,5 horas
BLUETOOTH
Versão do Bluetooth: V2.1+ EDR
Bluetooth: 2.402-2.48GHz
Potência de saíde de RF (Rádio Frequência): -3.838 dBm
Distância de Funcionamento: Até 10 metros, medido em espaço
aberto (paredes e estruturas poderão afetar a distância de
funcionamento do dispositivo).
O desenho e as especicações estão sujeitas a mudanças sem aviso
prévio.
ATENÇÃO: Para reduzir o risco de choque eléctrico,
não desmonte o aparelho. Nenhuma peça interna
pode ser reparada pelo utilizador. Cone todas as
reparações a um técnico qualicado.
O símbolo do relâmpago com uma seta situado no interior de
um triângulo destina-se a alertar o utilizador para a presença
de uma “tensão perigosa” no aparelho.
O ponto de exclamação situado no interior de um triângulo
alerta o utilizador para a existência de instruções importantes
na documentação que acompanha o aparelho.
AVISO:
Certique-se de que assegura uma ventilação suciente e não tapa
os orifícios de ventilação do aparelho.
• Não coloque velas sobre ou na proximidade do aparelho.
• Utilize este aparelho em climas temperados.
• Certique-se de que não expõe o aparelho a salpicos.
Preveja um espaço mínimo de 5 cm à volta do aparelho para
garantir uma ventilação suciente.
Não coloque qualquer recipiente com líquido, como uma jarra, sobre
o aparelho.
A placa de características situa-se na parte de baixo do aparelho.
Sobre o efeito de fenómenos eléctricos transitórios e / ou
electrostáticos, o produto pode apresentar avarias e pode ser
necessário proceder à reinicialização.
Se no futuro pretender deitar fora este aparelho, note que
os aparelhos eléctricos não devem ser lançados nas lixeiras
de resíduos domésticos. Informe-se para conhecer o centro
de reciclagem mais próximo. Consulte as autoridades locais
ou o seu revendedor para mais detalhes (Directiva sobre os
resíduos dos equipamentos eléctricos e electrónicos).
UTILIZANDO O CONECTOR DE ENTRADA
GUIA DE RESOLUÇÃO DE PROBLEMAS
ESPECIFICAÇÕES
INSTRUÇÕES DE SEGURANÇA
NEW ONE S.A.S
10, Rue de la Mission, 25480 Ecole Valentin, France
1. NFC-symbol
2. LED-Funktionsanzeige (blau
im Bluetooth-Modus, grün
im AUX-Eingangsmodus, rot
während des Ladevorgangs)
3. Ein/Aus
4. Wiedergabe/Pause
5. Anruf annehmen /
Anruf weiterleiten /
Wahlwiederholung / Anruf
beenden
6. : Gedrückt halten, um die
Lautstärke zu reduzieren;
kurz drücken, um zum
vorherigen Titel zu springen
7. : Gedrückt halten, um die
Lautstärke zu erhöhen; kurz
drücken, um zum nächsten
Titel zu springen
8. Mikrofon
9. Lautsprecher
10. Micro-USB-Port zum
Auaden
11. AUX-Eingang
BESCHREIBUNG DES GERÄTES
SPRITZWASSERFESTE BLUETOOTH-LAUTSPRECHER
DE
Das Gerät wird über eine integrierte, wiederauadbare Lithium-Ion-
Batterie betrieben. Laden Sie die integrierte Batterie mindestens vier
Stunden lang auf, bevor Sie das Gerät das erste Mal verwenden.
Um die Batterie aufzuladen, verbinden Sie das kleinere Ende des
mitgelieferten USB-Kabels mit dem Micro-USB-Port und das andere
Ende mit einem stromführenden USB-Port Ihres Computers oder mit
einem AC Netzteil (nicht enthalten).
Die LED-Funktionsanzeige leuchtet während des Ladevorgangs rot
und erlischt, sobald der Akku vollständig geladen ist.
Um Energie zu sparen, schaltet sich das Gerät automatisch aus, falls
nach Ende der Wiedergabe oder bei niedrig eingestellter Lautstärke
15 Minuten lang keine Eingabe am Gerät erfolgt.
Warnungen:
Bei Verwendung des eingebauten Akkus sollte die Umgebungstem-
peratur zwischen 5°C (41°F) und 35°C (95°F) betragen.
Um eine maximale Lebensdauer des eingebauten Akkus zu erzielen,
laden Sie ihn möglichst bei Zimmertemperatur auf.
Der in diesem Gerät eingebaute Akku kann bei falscher Verwendung
eine Gefahrenquelle von Feuer oder chemischer Verbrennung
darstellen. Nicht zerlegen, über 100°C (212°F) erhitzen oder
verbrennen.
Bitten achten Sie beim Entsorgen der verbrauchten Batterien auf
den Umweltschutz.
• Werfen Sie niemals Batterien ins Feuer!
Setzen Sie die Batterien keiner übermäßigen Wärme aus, wie
zum Beispiel der Sonneneinstrahlung, dem Feuer oder sonstigen
ähnlichen Wärmequellen.
Bei niedriger Batteriekapazität ertönt alle 30 Sekunden die Ansage
„Battery low“. Ist der Batteriestatus für den Betrieb des Geräts zu
niedrig, schaltet das Gerät automatisch in den Standby-Modus um.
ACHTUNG: Wenn die Batterien nicht richtig eingelegt sind,
besteht Explosionsgefahr. Verwenden Sie nur gleiche oder
gleichwertige Batterietypen.
STROMVERSORGUNG
Gerät EIN-/AUSSCHALTEN
Halten Sie die Taste gedrückt, um das Gerät EINZUSCHALTEN. Es
ertönt die Ansage „Power ON“.
Halten Sie die Taste erneut gedrückt, um das Gerät
AUSZUSCHALTEN. Es ertönt die Ansage „Power OFF“.
Der Bluetooth
®
-Markenname und damit verbundene Logos sind
Eigentum der Firma Bluetooth SIG, Inc. Jegliche Benutzung dieser
Marken durch die Firma New One S.A.S stehen unter Lizenz. Alle
anderen Produkt- und Markennamen sind Eigentum ihrer der
jeweiligen Besitzer.
Verbindungsaufbau mit einem Bluetooth-Gerät
Halten Sie die Taste gedrückt, um das Gerät EINZUSCHALTEN.
Die LED-Funktionsanzeige blinkt blau und weist somit auf den
Kopplungsmodus hin. Aktivieren Sie die Bluetooth-Funktion auf Ihrem
Bluetooth-Gerät, und wählen Sie "M-710 BT" in der Geräteliste.
(Lesen Sie bitte die Bedienungsanleitung des jeweiligen Geräts für
detaillierte Bedienungsschritte zum Verbindungsaufbau.) Wenn das
Bluetooth-Gerät Sie zur Eingabe eines Schlüssels auffordert, geben
Sie bitte "0000" ein. Manche Bluetooth-Geräte erfordern es zudem,
dass die Verbindung bestätigt wird. Nach erfolgreicher Kopplung der
Geräte ertönt die Ansage „Connected“.
Tipp: Wenn Sie Ihren Bluetooth-Lautsprecher mit einem anderen
Bluetooth-Audio-Gerät verbinden möchten, müssen Sie das zurzeit
verbundene Gerät zunächst trennen und die oben beschriebenen
Schritte erneut ausführen, um eine neue Verbindung herzustellen.
Auf einigen Geräten wie z. B. Computern müssen Sie bei
bestehender Verbindung das Gerät aus dem Bluetooth-Menü
wählen und als Audiogerät aktivieren.
Die Verbindung bleibt bestehen, wenn das Bluetooth-Gerät außer
Reichweite bzw. ausgeschaltet ist. Eine aktive Verbindung wird
dann wieder hergestellt, wenn das Bluetooth-Gerät sich wieder in
Reichweite bendet.
Wird das Gerät erneut eingeschaltet, versucht es automatisch, sich
mit dem zuletzt gekoppelten Bluetooth-Gerät zu verbinden.
Verwenden eines Bluetooth-Geräts
1. Bei bestehender Verbindung (siehe voriger Abschnitt), können Sie
das Bluetooth-Gerät bedienen und den Ton über das M-710 BT
wiedergeben.
2. Betätigen Sie die Taste , um die Wiedergabe vorübergehend
anzuhalten. Betätigen Sie die Taste ein weiteres Mal, um mit der
Wiedergabe fortzufahren.
3. Hallten Sie die Tasten / zur Einstellung der Lautstärke
gedrückt. Sie können die Lautstärke auch direkt auf dem Gerät, mit
dem die Verbindung hergestellt wurde, einstellen.
4. Drücken Sie die Tasten / kurz zur Auswahl der gewünschten
Audiodatei.
Hinweis: Während der Wiedergabe leuchtet die Bluetooth-Anzeige
blau.
BEDIENUNG
SP-3692 IB MUSE 001 REV3.indd 1 2016/6/8 16:45:17
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Muse M-710 BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Muse M-710 BT in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info