Manual Muse M-098 (page 2 of 2) (English)

500109

Zoom out

Zoom in

1/2

To insert a USB devices (not included)

Open the plastic cover, connect your USB device to the USB slot (9), it will switch to

“USB” mode automatically. If USB has been inserted, press MOD button (4) to switch

to USB mode.

To insert an SD/MMC card (not included)

Press button (1) to fold down the front panel ﬁ rst, take out the front panel, Insert

your SD/MMC card in card receptacle (24). Install and close the front panel then it will

automatically start playing. If SD/MMC card has been inserted, press MOD button (4)

to switch to card mode.

Basic player functions

Play/pause: press 1/PAU (17) to suspend momentarily the playing track. Press (17)

once again to resume playing.

Skip/fast search: press button (3) to skip forward to next track and (21) to skip

backward to previous track. Press and hold or (3/21) to search quickly within a

track.

Intro scan: press 2/INT button (16) when it show “INT ON”, then the player will play

the ﬁ rst 10 seconds of each track in the disc, press again to cancel this function when

it show “INT OFF”.

Repeat: Press RPT button (15) once to repeat your desired track. Press again to

repeat your desired directory, Press three times to repeat all.

Random playing: Press RDM button (14), all tracks will play randomly.

SELECTING DIRECTORY UP/DOWN: Press DIR-button (13) or DIR + button (12) to

select directory downward or upward. If the MP3 contents does not have any directory,

DIR- button (13) or DIR + button (12) are inactive.

WARNING - To reduce the risk of ﬁ re or electric shock, do not expose this appliance to

rain or moisture.

If at any time in the future you should need to dispose of this product please

note that Waste electrical products should not be disposed of with household

waste. Please recycle where facilities exist. Check with your Local Authority

or retailer for recycling advice.(Waste Electrical and Electronic Equipment

Directive)

ATTENTION: To reduce the risk of electric shock, do not remove

the cover. There are no user serviceable parts inside the unit. Re-

fer all servicing to qualiﬁ ed personnel.

GB - 15

LISTENING TO USB DEVICE OR SD/MMC CARD

TROUBLE SHOOTING GUIDE

SPECIFICATIONS

WARNINGS

GB - 14GB - 13GB - 12

GB - 11GB - 10GB - 9GB - 8

Alternative frequency selecting (AF)

The AF function switches to a different frequency on the same network in order to

maintain optimum reception. During FM mode, press AF button (22), certain program

will be automatically searched and received. If the reception of the current broadcast

station deteriorates, “AF” appears in the display and the radio searches for the same

program on another frequency. Press AF button (22) again to cancel this function.

When reception is bad, the “AF” icon will blink.

Press and hold AF button (22) for 5 seconds, the unit will be under “REG ON” or “REG

OFF” mode:

REG ON: it should be selected to the local broadcast of the current station, even if

there is a national broadcast of this station.

REG OFF: it should be selected to listen to the national broadcast of the current sta-

tion.

Trafﬁ c alarm (TA)

In the TA standby mode, when a trafﬁ c announcement broadcast starts, the trafﬁ c an-

nouncement broadcast is received as top priority regardless of the function mode so

you can listen to it. Trafﬁ c programme (TP) automatic tuning is also possible.

Press TA button (7), when LCD shows “TA”, traffic program will be automatically

searched and saved, when LCD shows “TP”, this means that the RDS broadcast sta-

tion being received has trafﬁ c announcement programmes.

If you press TA button (7) while a trafﬁ c announcement broadcast is being received,

the trafﬁ c announcement broadcast reception is cancelled and the unit goes into the

TA standby mode.

If a TP station is not received, the unit continues searching.

Press TA button (7) again to stop searching, “TA” goes off.

ALARM

“ALARM” will be displayed when an emergency broadcasting is received; meanwhile

sound output level will be adjusted to the preset output level automatically when the

volume control is set at minimum.

Program type selecting (PTY)

When PTY is selected, the radio starts to search corresponding PTY information, and

stops if the corresponding PTY information is detected.

If corresponding PTY information is not existed any more, PTY engaging is automati-

cally exit to normal mode.

Notes:

When PTY mode is engaged, the PTY switch is shared as follows:

According to above 2 allotted groups, the preset number is used for PTY selection as

follows:

MUSIC group

1. POP M, ROCK M

2. EASY M, LIGHT M

3.CLASSICS, OTHER M

4. JAZZ, COUNTRY

5. NATION M, OLDIES

6. FOLK M

SPEECH group

1. NEWS, AFFAIRS, INFO

2. SPORT, EDUCATE, DRAMA

3. CULTURE, SCIENCE, VARIED

4. WEATHER, FINANCE, CHILDREN

5. SOCIAL, RELIGION, PHONE IN

6. TRAVEL, LEISURE, DOCUMENT

Exit USB/SD card mode

1. To exit USB mode, disconnect your USB device with the unit, it will switch to tuner

mode directly.

2. To exit SD mode, push the SD card, then take out your SD card from the unit, it will

switch to tuner mode directly.

Note

* There are many USB devices or SD/MMC card in the market. We cannot guarantee

to support all different models. Please try another USB device or SD/MMC card if your

device is not supported.

* The unit might not support all the multimedia ﬁ les stored in SD/MMC card or USB be-

cause it includes some special playback procedure which might not be compatible with

the procedure of this unit.

1. Connect your auxiliary source (e.g. mp3 player) to the AUX IN jack (10)

2. Press PWR (2) button to turn the unit on.

3. Press MOD (4) to select AUX mode.

4. Start playback from your auxiliary source.

5. Adjust the volume (5) to desired level.

6. Disconnect your auxiliary source from the Aux in jack (10), press MOD button (4) to

select other source as your desired.

Notes:

For the sake of safety, always shut down the generator and take out the key from the

ignition before cleaning. Never keep your ﬁ nger or any metal device touch the connec-

tor directly.

Replacing the Fuse

Make sure the amperage matches the speciﬁ ed value when replacing the fuses. If the

fuse is blown, check the power connection and replace with a new one. If the same

problem occurs, it would be subjected to the malfunction in-house. In such cases,

please consult the nearest service dealer.

Note:

Due to continuous product improvement, specifications and design are subject to

change without prior notice.

CAUTION! The unit conforms to the international safety speciﬁ cations and to guide

lines of the European community and also complies with current standards concerning

electrical safety and electromagnetic compatibility EMC.

The exclamation point within the triangle is a warning sign alerting the user of

important instructions accompanying the product.

The lightening ﬂ ash with arrowhead symbol within the triangle is a warning

sign alerting the user of “dangerous voltage” inside the unit.

PTY SPEECH group PTY MUSIC group PTY off

LISTENING TO AUXILIARY SOURCE

Precaution

- Clean the front panel with a soft cloth, or damp chamois leather. Never use solvents.

- Handling the Detachable Front Panel:

Do not expose to rain or water;

do not drop or apply shock.

- Make sure that you keep your set away from water and high temperatures.

- The use of apparatus in moderate climates.

- Do not be exposed to dripping or splashing, and that no object ﬁ lled with liquids, such

as vases, shall be placed on the apparatus.

- No naked ﬂ ame sources such as lighted candles should be placed on the apparatus.

MAINTENANCE

General

Power Requirement 12V DC (11-16V allowable)

Load Impedance 4 Ω

Max. Power Output 40W x4

Tone Controls ±10 dB

Bass at 100 Hz

Treble at 10 kHz

Dimensions Approx. 188 x 134 x59 mm (d/w/h)

Mounting Dimensions Approx. 169 x 182 x53 mm (d/w/h)

Weight Approx. 0.82 kg

FM Section

Tuning Range 87.5-108 (MHz)

IF Range 10.7 MHz

Usable Sensitivity (-30dB) 15 dBuV

Signal-to-noise Ratio 50 dB

Stereo Separation 25 dB

USB player Section

Signal-to-noise Ratio 60 dB

Separation 40 dB

Distortion 0.5%

Frequency Response 20-20000Hz

Searching a track in MP3-USB/SD

1. Press AMS/SCH button (6) once, press the keys standing for corresponding

numbers

2. After select your desired track number, the selected track number will show on

display.

3. Press SEL/VOL knob (5) to start playing.

Cleaning the Connector

If the connector between the main unit and the front panel is dirty, it may result the

unit in abnormal working condition. To avoid such problems happening, please detach

the front panel, and clean the connector with an alcohol swab. Gently clean and avoid

damaging the connector.

Symptom

No power.

No sound.

The operation

keys do not work.

The car ignition switch is

not on.

The fuse is blown.

Volume is in minimum

Wiring is not properly

connected.

The built-in microcomputer

is not operating properly due

to noise.

Press the RESET button.

Front panel is not properly fix into its

place.

If the power supply is connected to

the car accessory circuits, but the

engine is not moving, switch the

ignition key to "ACC".

Replace the fuse.

Adjust volume to a desired level.

Cause Solution

Check wiring connection.

The radio does

not Work. The

radio station

automatic

selection does

not work.

The antenna cable is not

connected.

Insert the antenna cable firmly.

The signals are too weak.

Select a station manually.

Scanning/memorizing stations automatically

- By AMS/SCH button (6)

During tuner mode, press and hold AMS/SCH (6) button for 3 seconds to start auto-

matic scanning the stations and store them into number buttons 1-6. Press AMS/SCH

button (6) to broadcast each station which stores in the 1-6 number buttons. After

scanning, you can press AMS/SCH (6) corresponding number button 1-6 (12-17) to

start playing that station.

- By number button 1-6 (12-17)

1. Tune to a station by or (3/21).

2. Press and hold one of the 1- 6 Number buttons (12-17) for 2 seconds until LCD

shows the corresponding number, which indicates that station is already stored in the

corresponding number button.

3. Under radio mode, press 1- 6 Number buttons (12-17) to listen to stored stations.

4. When you are listening to a station stored in a number button, press and hold anoth-

er number button for more than 2 seconds can store the station into another number

button.

Note: The unit can be stored up to 6 stations for each band.

-LOC ON/ OFF: Repeatedlly press SEL/VOL knob (5) to select “LOC” mode, when

selected ON, the strong signal local stations can be received, when selected OFF, the

week signal out-of-town stations may be received.

-STEREO / MONO: Repeatedly press SEL/VOL knob (5) to select to “STEREO/

MONO” mode. FM listening is generally done in Stereo mode. However, if the signal

is weak or reception is not as good as you would like, switching to Mono mode usually

improves the overall sound quality.

-- RDS (Radio Data System) Operations --

This unit has a built-in RDS decoder system that supports broadcast stations transmit-

ting RDS data. This system can display the name of the broadcast station being re-

ceived and can automatically switch to the broadcast station with the best reception as

you move long distances (AF switching). Also, if a trafﬁ c announcement or programme

type is broadcast from an RDS station, no matter what mode you are in, this broadcast

is received. Additionally, if EON information is received, this information enables au-

tomatic switching of other preset stations on the same network and interruption of the

station being received with trafﬁ c information from other stations. This function is not

available in some areas.

AR-3043 IB MUSE 001 REV0 GB.indd2 2AR-3043 IB MUSE 001 REV0 GB.indd2 2 2011-3-4 17:28:142011-3-4 17:28:14

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Muse M-098 in the language / languages: English as an attachment in your email.

The manual is 0,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Muse M-098 Manual

Product: