Manual MundoClima MUCSR-H6 - Model 24 to 60 (page 8 of 40) (English)

726078

Zoom out

Zoom in

1/40

INSTALLATION MANUAL

Fig.5-5 Fig.5-4

Fig.5-9 Fig.5-8

1.3 Install The Panel

Remove the air-in grill.

Never put the panel face down on floor or against the

wall, or on bulgy objects.

Never crash or strike it.

Slide two grill switches toward the middle at the same time,

and then pull them up. (Refer to Fig.5-7)

Draw the grill up to an angle of about 45, and remove it.

(Refer to Fig.5-8)

Remove the installation covers at the four corners

Wrench off the bolts, loose the rope of the installation covers,

and remove them. (Refer to Fig.5-9)

CAUTION

Fig.5-6

Fig.5-7

1.2 Install the main body

Cut a quadrangular hole of 880x880mm in the ceiling

according to the shape of the installation paper board.

(Refer to Fig.5-2)

The center of the hole should be at the same position of

that of the air conditioner body.

Determine the lengths and outlets of the connecting pipe,

drainpipe and cables.

To balance the ceiling and to avoid vibration, please

enforce the ceiling when necessary.

Adjust the hexangular nuts on the four installation hooks

evenly, to ensure the balance of the body.

If the drainpipe is awry, leakage will be caused by the

malfunction of the water-level switch.

Adjust the position to ensure the gaps between the body

and the four sides of ceiling are even. The body's lower

part should sink into the ceiling for 10~12 mm (Refer to

Fig.5-4) .

In general, L is half of the screw length of the installation

hook. (Refer to Fig.5-4)

Locate the air conditioner firmly by wrenching the nuts

after having adjusted the body's position well. (Refer to

Fig.5-5)

Select the position of installation hooks according to the

hook holes on the installation board.

Drill four holes of

12mm, 45~50mm deep at the selected

positions on the ceiling. Then embed the expansible

hooks (fittings).

Face the concave side of the installation hooks toward the

expansible hooks. Determine the length of the installation

hooks from the height of ceiling, then cut off the

unnecessary part.

If the ceiling is extremely high, please determine the

length of the installation hook according to facts.

New built houses and ceilings

In the case of new built house, the hook can be embedded

in advance (refer to 2 mentioned above). But it should be

strong enough to bear the indoor unit and will not become

loose because of concrete shrinking.

After installing the body, please fasten the installation paper

board onto the air conditioner with bolts(M6X12) to

determine in advance the sizes and positions of the hole

opening on ceiling. (Refer to Fig.5-6)

Refer to 3 above for installation.

Remove the installation paper board.

Please first guarantee the flatness and horizontal of

ceiling when installing it.

Refer to 1 mentioned above for others.

After installing the body, the four bolts(M6x12)must be

fastened to the air conditioner onto ensure the body is

grounded well.

CAUTION

The existing ceiling (to be horizontal)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of MundoClima MUCSR-H6 - Model 24 to 60 in the language / languages: English as an attachment in your email.

The manual is 4,22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

MundoClima MUCSR-H6 - Model 24 to 60 Manual

Product: