30244
45
Zoom out
Zoom in
Previous page
1/48
Next page
45
v The receiver aerial may be damaged, too short (less than 40 cm) or badly
positioned.
v Ambient conditions may be poor (damp track surface, metal fences
shielding the signal, etc.).
If the range is not sufficient with the aerial collapsed, and you cannot locate the
source of the problem as described above, try the following alternative test: extend
the transmitter aerial fully, then repeat the check as described above. If the effective
range is 1.5 times longer than the farthest reach of the track, you should be safe to
operate the system.
!!
If you are still in any doubt - don’t risk it and run the model! Take your time to
check everything in peace and quiet, so that you can locate and solve the
problem before you place your valuable model at risk!
11.3. Care of the transmitter
Protect your transmitter from mechanical damage, temperatures above 60°C (direct
sun inside a car), damp, solvents, model fuel, combustion residues and dust. Kindly
bear in mind that a rapid change in temperature (e.g. moving the model from a
warm workshop to a cold car) can cause condensation on and in the transmitter, and
condensation may prevent the unit functioning correctly. If this should happen, it
makes sense to carry out a particularly thorough range check, and allow your
transmitter plenty of time to adapt to the ambient temperature. Check that the
transmitter is completely dry both inside (battery compartment) and out before
using it.
Cleaning the transmitter
The best tool for removing dust is a soft paintbrush. The transmitter case can be
cleaned with a slightly moist soft cloth and a mild household cleaner.
!!
Check that no fluid gets inside the transmitter.
11.4. Maintenance
Your transmitter contains no parts which require maintenance.
!!
Nevertheless, we strongly recommend that you carry out a range check and
examine all the working systems at regular intervals.
What should you do if problems arise or you have queries?
The first stop should be your local model shop, where advice is gladly given.
The addresses of our Service Centres are printed on the last page of these
instructions.
For technical queries, and questions regarding the use of the transmitter, please call
us on the MULTIPLEX hotline on +49-7233-7343.
You can also reach us by E-mail at this address: technik@multiplex-rc.de.
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Multiplex PROFIcar403 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Multiplex PROFIcar403 in the language / languages: English, Dutch as an attachment in your email.

The manual is 0,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Multiplex PROFIcar403

Multiplex PROFIcar403 User Manual - German - 48 pages

Multiplex PROFIcar403 User Manual - Italian - 57 pages

Multiplex PROFIcar403 User Manual - Spanish - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info