Manual Multiplex PROFIcar403 (page 26 of 48) (English, Dutch)

30244

Zoom out

Zoom in

1/48

§ Proceed to „T-CURV“ using the A button.

§ Search for the „IT+“ value using the handle button

§ Set the value you want using the digi-adjustor.

In the example shown on the right the set value is 16%.

If you move back to the operating display by pressing any menu button (except A ),

the top line of the screen will alternate between the model name and „START“.

' TIP !

The automatic start function can only be triggered when the operating display is on

the screen

4.3.2. Initiating the automatic start function using the trigger

This works with all vehicle types. When the trigger is moved from the deadband in

the direction of full throttle for the first time, the following things happen:

§ The timer and lap counter start running, and are shown on the screen (varies

according to the selected timer mode).

§ The set „addition“ for initial throttle comes into force (see 4.3.1.).

Once the automatic start is initiated, only the model name appears on the screen.

4.3.3. Initiating the automatic start function with the handle button or trigger

If your model is equipped with separate servos for throttle and brake (vehicle types

„3+1 CH“ and „5 CH“), there are two methods of starting:

§ Lock the brake by pressing the handle button

. Now you can blip the

throttle, and the car will not roll away.

§ When you release the handle button

the car will start - provided that the

trigger is not in the deadband.

§ If the trigger is in the deadband (idle) you can release the brake (handle

button). You can then start the car by squeezing the trigger, as described

below.

4.3.4. Terminating the automatic start phase

When the start phase ends, the program switches off the addition to the initial

throttle setting „IT+“, and the throttle response reverse to the „normal“ curve (2 or 5

points)..

§ If a 2-point throttle curve is in use, the start phase ends when you move the

trigger to the deadband (idle), or when the throttle trigger exceeds the value

determined by Initial Throttle and IT+.

§ If you have set a 5-point throttle curve, the start phase ends when you move

the trigger into the deadband, or when the throttle trigger exceeds the

fourth point on the throttle curve „4T“.

The correlation between these values is illustrated in the diagrams in Section 4.3,

termed the „automatic start function working range“.

G-CURV

IT+ 16

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Multiplex PROFIcar403 in the language / languages: English, Dutch as an attachment in your email.

The manual is 0,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Multiplex PROFIcar403

Multiplex PROFIcar403 User Manual - German - 48 pages

Multiplex PROFIcar403 User Manual - Italian - 57 pages

Multiplex PROFIcar403 User Manual - Spanish - 48 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Multiplex PROFIcar403 Manual

Product: