561617

Multiplex Merlin RR Manual

1
Zoom out
Zoom in
Previous page
1/2
Next page
RR Merlin
# 26 4237
D
Zusatzanleitung RR Merlin Nr. 82 5854 - Seite 1 von 2
MULTIPLEX Modellsport GmbH & Co.KG • Westliche Gewerbestrasse 1 • D-75015 Bretten-Gölshausen • www.multiplex-rc.de
GB
# 26 4237
RR Merlin
# 26 4237
RR
D : Zusätzlich Empfohlene Ausrüstung
Empfänger z.B. RX-6-Synth IPD (35 MHz) # 5 5876
oder (40/41MHz) # 5 5877
oder RX-5-DR light M-LINK (2,4 GHz) # 5 5808
oder RX-6-DR light M-LINK (2,4 GHz) # 5 5809
GB: Additional recommended equipment:
Receiver e.g. RX-6-Synth IPD (35 MHz) # 5 5876
or (40/41MHz) # 5 5877
or RX-6-DR light M-LINK (2,4 GHz) # 5 5808
or RX-6-DR light M-LINK (2,4 GHz) # 5 5809
F : Equipement recommandé:
Récepteur RX-6-Synth IPD (35 MHz) # 5 5876
ou (40/41MHz) # 5 5877
ou RX-5-DR light M-LINK (2,4 GHz) # 5 5808
ou RX-6-DR light M-LINK (2,4 GHz) # 5 5809
I : Componenti consiglati:
Ricevente p.es. RX-6-Synth IPD (35 MHz) # 5 5876
oppure (40/41MHz) # 5 5877
oppure RX-5-DR light M-LINK (2,4 GHz) # 5 5808
oppure RX-6-DR light M-LINK (2,4 GHz) # 5 5809
E : Componentes recomendados:
Receptor, p.ej. RX-6-Synth IPD (35 MHz) # 5 5876
o (40/41MHz) # 5 5877
o RX-5-DR light M-LINK (2,4 GHz) # 5 5808
o RX-6-DR light M-LINK (2,4 GHz) # 5 5809
Das Modell RR MERLIN # 26 4237 ist nahezu flugfertig vormontiert und es
entfallen für Sie zahlreiche Arbeitsschritte, die in der Bauanleitung beschrie-
ben sind. Das Modell ist somit in kürzester Zeit betriebsbereit. Lesen Sie vor
Fertigstellung und Inbetriebnahme die Anleitungen und beachten unbedingt
auch die Sicherheitshinweise und Tipps.
Um das Modell vollständig auszurüsten, ist noch ein Empfänger notwendig.
Unsere Empfehlungen hierzu entnehmen Sie bitte aus der Bauanleitung
bzw. diesem Blatt und darüber hinaus (z.B. Sender, Ladegerät etc.) dem
aktuellen Katalog oder der Multiplex Homepage unter: www.multiplex-rc.de
Stückliste RR Merlin* # 26 4237
Lfd. Stk. Bezeichnung Material Abmessungen
1 1 Bauanleitung Merlin
1.1 1 Anleitungen RR Merlin / MULTIcont BL-20 S-BEC / Antriebssatz
2 1 Dekorbogen bedruckte Klebefolie Fertigteil
3 1 Rumpf Elapor geschäumt Fertigteil
5 1 Tragfläche links Elapor geschäumt Fertigteil
6 1 Tragfläche rechts Elapor geschäumt Fertigteil
7 1 Höhenleitwerk links Elapor geschäumt Fertigteil
8 1 Höhenleitwerk rechts Elapor geschäumt Fertigteil
20 2 Klettband Pilzkopf Kunststoff 25x60mm
21 2 Klettband Velours Kunststoff 25x60mm
28 1 Inbusschlüssel Metall SW 1,5
92 1 LiPo-Akku Li-BATT-BX 3/1-450mAh
* mit 4 eingebauten Servos Nano-S incl. kompl. Ruderanlenkung,
BL-Motor Himax C2212-1180, Regler MULTIcont BL-20 S-BEC,
Klapp-Luftschraube 8 x 5”, Spannzange, Mitnehmer und Spinner Ø 33mm.
1. Prüfen Sie mit Hilfe obenstehender Stückliste den Inhalt auf
Vollständigkeit.
2. Empfängereinbau ==> Ausbau zum Powersegler, Punkt 7.2 in der
Bauanleitung ==> Abb. 24
3. Höhenleitwerk montieren, Punkt 4. in der Bauanleitung ==> Abb.18
Achtung: Die Leitwerke werden nicht verklebt und bleiben zum Trans-
port teilbar! Zur Demontage drücken Sie die mit X gekennzeichnete Stelle
um die Arretierung zu lösen.
4. Zusammenbau von Tragflächen und Rumpf
Punkt 6. in der Bauanleitung ==> Abb.22
Achtung: Flügel werden nicht verklebt und bleiben zum Transport teilbar!
5. Flugakku einbauen ==> Abb.24
6. Inbetriebnahme des Antriebs ==> Tuning mit Luftschraube 8x5”
Siehe Anleitung Antriebssatz „Merlin-TUNING“ und Regleranleitung.
7. Dekorbogen ausschneiden und aufkleben
8. Seitenruderservoabdeckung Punkt 8. in der Bauanleitung ==> Abb.25
9. Ruderausschläge und Schwerpunkt einstellen Punkt 7.3. in der
Bauanleitung, EWD + CG ==> Abb.27
10. Der Erstflug - ab Punkt 11. in der Bauanleitung
Prüfen Sie vor jedem Start die Funktionsfähigkeit Ihres Modells, der Ru-
der und Anlenkungen sowie den Antrieb und die Akkus.
The RR MERLIN model aircraft, # 26 4237, is supplied factory-assembled and
almost completely ready to fly. Many of the stages of construction described
in the building instructions have already been completed for you, so the model
can be ready for the air in a very short time. Please read through these
instructions before you complete and fly the model, paying particular attention
to the Safety Notes and Tips.
To complete the model’s equipment you will need a receiver. Please refer to
our recommendations stated in the building instructions and this sheet. For
details of additional equipment (e.g. transmitter, battery charger etc.) we
suggest that you turn to the current Multiplex catalogue, or visit the website
at: www.multiplex-rc.de
Parts List - RR Merlin* # 26 4237
PartNo. Description Material Dimensions
1 1 Merlin building instructions
1.1 1 RR Merlin / MULTIcont BL-20 S-BEC / Power Set instructions
2 1 Decal sheet Printed film
3 1 Fuselage Moulded Elapor foam Ready made
5 1 L.H. wing panel Moulded Elapor foam Ready made
6 1 R.H. wing panel Moulded Elapor foam Ready made
7 1 L.H. Tailplane panel Moulded Elapor foam Ready made
8 1 R.H. Tailplane panel Moulded Elapor foam Ready made
20 2 Velcro tape, “mushroom” Plastic 25 x 60 mm
21 2 Velcro tape, “felt” Plastic 25 x 60 mm
28 1 Allen key Metal 1.5 mm A/F
92 1 LiPo-battery Li-BATT-BX 3/1-450mAh
* fitted with four factory-installed Nano-S servos incl. complete
linkage systems, Himax C2212-1180 brushless motor, MULTIcont
BL-20 S-BEC speed controller, 8 x 5” folding propeller, taper collet,
driver and 33 mm Ø spinner.
1. Check that all parts are present, referring to the Parts List.
2. Receiver installation ==> Power-glider version, Point 7.2 in the
building instructions ==> Fig. 24
3. Completing the tailplane, Point 4. in the building instructions ==>
Fig. 18 Caution: the tailplane panels are not glued in place, and can
be separated for ease of transport. To remove them, disengage the
latch by pressing the point marked X.
4. Joining the wings and fuselage
Point 6. in the building instructions ==> Fig. 22 Caution: the wings are not
glued in place, and can be separated for ease of transport.
5. Installing the flight battery ==> Fig. 24
6. Using the power system for the first time ==> Tuning version with
8 x 5" propeller. See instructions for the "Merlin-TUNING" power set and
the speed controller instructions.
7. Cut out the decals from the decal sheet and apply them to the
model.
8. Rudder servo cover Point 8. in the building instructions ==> Fig. 25
9. Set the control surface travels and Centre of Gravity, Point 7.3. in
the building instructions; Longitudinal dihedral + CG ==> Fig. 27
10. First flight - section starting at Point 11. in the building instructions
Before each flight test all the working systems on your model; check the
control surfaces and linkages, also the power system and batteries.
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Multiplex Merlin RR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Multiplex Merlin RR in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info