Manual Multiplex FunCub RR (page 1 of 2) (English, German, French, Italian, Spanish)

561619

Zoom out

Zoom in

1/2

RR FunCub

# 26 4243

Zusatzanleitung RR FunCub

Nr. 82 5857 - Seite 1 von 2

MULTIPLEX Modellsport GmbH & Co.KG • Westliche Gewerbestrasse 1 • D-75015 Bretten-Gölshausen • www.multiplex-rc.de

# 26 4243

RR FunCub

# 26 4243

RRRR

D : Zusätzlich Empfohlene Ausrüstung

Empfänger z.B. RX-7-DR light M-LINK # 5 5810

oder RX-9-DR M-LINK # 5 5812

Akku z.B. Li-BATT eco 3/1-2000 (M6) # 15 7231

GB: Additional recommended equipment:

Receiver e.g. RX-7-DR light M-LINK # 5 5810

or RX-9-DR M-LINK # 5 5812

Flight battery e.g. Li-BATT eco 3/1-2000 (M6) # 15 7231

F : Equipement recommandé:

Récepteur RX-7-DR light M-LINK # 5 5810

ou RX-9-DR M-LINK # 5 5812

accu p.es. Li-BATT eco 3/1-2000 (M6) # 15 7231

I : Componenti consiglati:

Ricevente p.es. RX-7-DR light M-LINK # 5 5810

oppure RX-9-DR M-LINK # 5 5812

pacco batteria p.es. Li-BATT eco 3/1-2000 (M6) # 15 7231

E : Componentes recomendados:

Receptor, p.ej. RX-7-DR light M-LINK # 5 5810

o RX-9-DR M-LINK # 5 5812

batería, p.ej. Li-BATT eco 3/1-2000 (M6) # 15 7231

Das Modell RR FunCub # 26 4243 ist nahezu flugfertig vormontiert und es

entfallen für Sie zahlreiche Arbeitsschritte, die in der Bauanleitung beschrie-

ben sind. Das Modell ist somit in kürzester Zeit betriebsbereit. Lesen Sie vor

Fertigstellung und Inbetriebnahme die Anleitungen und beachten unbedingt

auch die Sicherheitshinweise und Tipps.

Um das Modell vollständig auszurüsten, wird noch ein Empfänger und der

Antriebsakku notwendig. Unsere Empfehlungen hierzu entnehmen Sie bitte

aus der Bauanleitung bzw. diesem Blatt und darüber hinaus (z.B. Sender,

Ladegerät etc.) dem aktuellen Katalog oder der Multiplex Homepage unter:

www.multiplex-rc.de

Stückliste RR FunCub # 26 4243

Lfd. Stk. Bezeichnung Material Abmessungen

1 1 Bauanleitung FunCub

1.1 1 Anleitungen RR FunCub / MULTIcont BL-30 S-BEC / Antriebssatz

2 1 Dekorbogen A,B,C bedruckte Klebefolien Fertigteile

3 * 1 Rumpf vormontiert * Elapor geschäumt Fertigteil

6 ** 1 Tragfläche links ** Elapor geschäumt Fertigteil

7 ** 1 Tragfläche rechts ** Elapor geschäumt Fertigteil

8 1 Höhenleitwerk Elapor geschäumt Fertigteil

9 *** 1 Seitenleitwerk *** Elapor geschäumt Fertigteil

70 1 Hauptfahrwerk F-Stahl Ø2,5 mm Fertigteil

71 2 EPP Leichträder EPP Ø120 Nabe 2,6mm

83 1 Propeller APC 13*4"

1 Kleinteilebeutel mit den Teilen: 20(2x),21(2x),29,32(2x),

47,48,72(4x),73(4x),75,82 und 4x Verlängerungskabel 150mm

==> siehe Stückliste in der Bauanleitung

* mit 2 eingebauten Servos Tiny-S (UNI) incl. kompl. Ruderanlenkungen,

BL-Motor Himax C3516-0840, Regler MULTIcont BL-30 S-BEC.

** mit 2 eingebauten Servos Nano-S (UNI) incl kompl. Ruderanlenkungen

*** mit montiertem Heckfahrwerk

1. Prüfen Sie mit Hilfe der Stückliste den Inhalt auf Vollständigkeit.

2. Höhenleitwerk einkleben Punkt 8. in der Bauanleitung ==> Abb.9

3. Seitenleitwerk einkleben Punkt 10. in der Bauanleitung ==> Abb.13

4. Servohebel in Mittelstellung, Gestänge an den Leitwerken durch die

Gestängeanschlüsse führen und mit Inbusschlüssel 29 festklemmen.

5. Hauptfahrwerk montieren Punkt 11. in der Bauanleitung ==> Abb.15

6. Kontrollmontage Tragflächen Punkt 18. in der Bauanleitung ==> Abb.26

Achtung: Flügel werden nicht verklebt und bleiben zum Transport teilbar!

7. Flugakku und Empfänger einbauen Punkt 23.==> Abb.30

8. Antennenverlegung Punkt 24.

9. Montage und Inbetriebnahme des Antriebs

Anleitung Antriebssatz FunCub ==> Punkt 5 und 6.

10. Dekorbogen aufkleben Punkt 26. in der Bauanleitung

11. Ruderausschläge und Schwerpunkt einstellen

Punkt 25. und 27. in der Bauanleitung ==> Abb.31

12. Der Erstflug - ab Punkt 28. in der Bauanleitung

Prüfen Sie vor jedem Start die Funktionsfähigkeit Ihres Modells, der Ruder

und Anlenkungen sowie den Anrieb und die Akkus.

The RR FunCub model aircraft, # 26 4243, is supplied factory-assembled

and almost completely ready to fly. Many of the stages of construction

described in the building instructions have already been completed for

you, so the model can be ready for the air in a very short time. Please read

through these instructions before you complete and fly the model, paying

particular attention to the Safety Notes and Tips.

To complete the model’s equipment you will need a receiver and flight

battery. Please refer to our recommendations stated in the building

instructions and this sheet. For details of additional equipment (e.g.

transmitter, battery charger etc.) we suggest that you turn to the current

Multiplex catalogue, or visit the website at: www.multiplex-rc.de

Parts List - RR FunCub # 26 4243

PartNo. Description Material Dimensions

1 1 FunCub building instructions

1.1 1 RR FunCub / MULTIcont BL-30 S-BEC / Power Set instructions

2 1 Decal sheet A,B,C Printed film

3 * 1 Fuselage, assembled * Moulded Elapor foam Ready made

6 ** 1 L.H. wing panel** Moulded Elapor foam Ready made

7 ** 1 R.H. wing panel** Moulded Elapor foam Ready made

8 1 Tailplane Moulded Elapor foam Ready made

9***1 Fin *** Moulded Elapor foam Ready made Ready made

70 1 Main landing gear Spring steel 2.5 mm Ø Ready made

71 2 EPP light wheels EPP Ø120 boss 2,6mm

83 1 Propeller APC 13 x 4"

82 1 Propeller driver ACC383 Shaft Ø 4, prop. Ø 6 mm

1 Bag with following parts: 20(2x),21(2x),29,32(2x),

47,48,72(4x),73(4x),75,82 and 4x extension leads 150mm

==> see partlist in manual

* fitted with two factory-installed Tiny-S (UNI) servos incl. complete linkage systems,

Himax C3516-0840 brushless motor, MULTIcont BL-30 S-BEC speed controller.

** fitted with two factory-installed Nano-S (UNI) servos incl. complete linkage systems

***with tailwheel unit fitted

1. Check that all parts are present, referring to the Parts List.

2. Glue the tailplane in place Point 8. in the building instr. ==> Fig. 9

3. Glue the fin in place Point 10. in the building instr. ==> Fig. 13

4. Servo output arm to centre, thread tail pushrods through swivel

pushrod connectors, secure them by tightening screws in connectors

using allen key 29.

5. Install the landing gear Point 11. building instr. ==> Fig. 15

6. Check wing installation Point 18. in the building instr. ==> Fig. 26

Caution: do not glue wings together; a two-part wing is much easier to

transport.

7. Install the flight battery and receiver Point 23. ==> Fig. 30

8. Aerial deployment Point 24.

9. Preparation and installation of power system

FunCub Power Set instructions ==> Point 5 and 6

10. Apply decals Point 26. in the building instructions

11. Set control surface travels and Centre of Gravity

Points 25. and 27. in the building instructions ==> Fig. 31

12. First flight - section starting at Point 28. in the building instructions

Before each flight test all the working systems on your model; check

the control surfaces and linkages, also the power system and

batteries.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Multiplex FunCub RR in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Multiplex FunCub RR Manual

Product: