30222
29
Zoom out
Zoom in
Previous page
1/32
Next page
Swapping the
sticks
round
1.
Open the transmitter.
2. Undo the
two screws
retaining
each stick
mechanics.
The return
spring must not
be
removed.
3. Remove the stick mechanics.
To
do this
you
should carefully
press
the bearing outwards with
a
screwdriver, then lift
out the mechanics. The
top
part
of the stick
unit stays in
the transmitter.
4. Femove
lhe blanking
plug
from
the
trim
lever
slot.
Push
the blanking
plug
out from inside from
the stick unit top
section
using a blunt
instrument.
Press
the
plug
into the
other
slot.
5. Rotate the
stick
mechanics
through
g0
degrees, and tit
the
assembly again.
Please note
-
importanl:
The lugs
on the mechanics
must engage in
the recesses in
the stick top
section.
6. Screw the mechanics in
place
again.
Check that the stick and
trim
lever move
freely,
and do
not
jam
or
toul
on anything.
Lugs
Fig.32:
Conveiing the stick units
(seen
from inside
the ttansmitte]
How are the
sticks connected?
You will need
to swap over the
plugs
at the main
circuit board, to ensure
that the stick assignment is correct.
.
Direction control stick
(now
on the
left
of the transmitter)
to socket 1
,
black wire
on the batterv side.
.
Power
control stick
(now
on the
right
of the lransmitter)
to socket
2,
black wire on the
battery side.
How is
the transmitter re-calibrated?
lf the transmitter is
to
work
correctly when
you
adjust
servo travel and
mixers,
the correlation between the
stick
movements
and the arrows in
the display
must
be correct.
So
first
check this:
Are the transmitter
controls correctly
connected?
Then
carry out the calibration
process.
The
procedure
is
described in the
section:
How
are sticks and other
contrcls calibrated?
Remove
latches
Open
tan6mitter
Beanng
Fig.33:
Stick unit connections
(seen
frcm inside
thettansmittet)
Tim
lever slot
GB-29
il-nr
lbJ3)|r
27
Manual EUROPA
mc
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Multiplex EUROPAmc at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Multiplex EUROPAmc in the language / languages: English as an attachment in your email.

The manual is 1,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Multiplex EUROPAmc

Multiplex EUROPAmc User Manual - German - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info