601746
7
Zoom out
Zoom in
Previous page
1/8
Next page
10
7
Status Operation
LED Indicator &
Sound
LCD Display
Switch to/
from waiting
call
Redial last
number
Voice dial
Mute
microphone
Adjust
Volume
Privacy call
Disconnect
with mobile
Low battery
Charging
Charging
completed
During a call, when another call
dials in:
1.Reject the incoming call if no
any operation in 8 seconds.
2.Reject the incoming call if
double click Multifunction Key.
3.To receive the incoming call
and end the active call, click
Multifunction Key once.
4.To switch to the incoming call,
press & hold Multifunction Key
for 2 seconds. To switch back,
press & hold for 2 seconds
again.
In standby mode, press Multi-
function Key twice.
In standby mode, press Multi-
function Key once.
During a call, click together '+'
and '-' buttons once. Click again
for un-mute.
Click '+' or '-' button to control the
volume up or down.
Connect external headphone to
headphone port.
Press & hold '+' for 2 seconds.
To reconnect to phone, click
Multifunction Key once.
-
Connect to charger
Within 3 hours
'do' sound
-
A tone from the hands-
free indicates the phone
is ready to receive voice
tag.
'do' sound. (You can still
hear the other side.)
-
-
-
Red & Blue ashes and
'do' sound
Constantly red on
Stops red
Caller number
>
Call Hold
Redial
Voice Call
>
Dialing
MUTE MIC /
UNMUTE MIC
VOL
-
BLUETOOTH
Low Battery
Charging
BLUETOOTH
Connect / Reconnect to phone
After the handsfree is switched on, it is in idle mode. It is waiting to be paired or connnected by
mobile phone. The LED indicator ashes blue every 5 seconds indicates this mode. When the
handsfree and the device are disconnected, the handsfree will return back to idle mode.
To connect with phone
EITHER
To connect with paired phone or reconnect with previously connected phone, click Multifunction
Key once. The handsfree will search and connect to the phone nearby automatically. (The LED
indicator ashes blue every second indicates the searching mode. The searching may last for
1/2 minute. If no phone can be found, the handsfree will return to idle mode.)
OR
To connect with the handsfree through the phone, in the setting menu of the phone, select
‘HF009’ from ‘Paired Device’. Select ‘connect’ and the phone will connect to the handsfree.
Handsfree Functions
Receive call
Reject call
End call
Switch to/from waiting call
(call waiting)
When handsfree is ringing, the LCD displays the calling number.
Press Multifunction Key once to receive the call and ‘Active Call’
will be displayed.
When handsfree is ringing, the LCD displays the calling number.
Press Multifunction Key twice to reject the call and ‘BLUETOOTH’
will be displayed.
During a call, press Multifunction Key once. LCD displays
‘BLUETOOTH’.
When a second call dials in during the call, the LCD displays the
second calling number.
1. Reject the incoming call if no any operation in 8 seconds.
2. Reject the incoming call if double click Multifunction Key.
3. To receive the incoming call and end the active call, click
Multifunction Key once.
4. To switch to the incoming call, press & hold Multifunction Key
for 2 seconds. LCD displays 'Call Hold'. To switch back, press
& hold for 2 seconds again.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MT Logic BTHF009 DFP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MT Logic BTHF009 DFP in the language / languages: English as an attachment in your email.

The manual is 0,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info