Manual Mr Handsfree KB300 iBell Set (page 1 of 2) (English, German, Dutch, French)

656839

Zoom out

Zoom in

1/2

User’s Manual

ILLUSTRATIONS

DECLARATION OF CONFORMITY

CONTENT OF PACKAGING

Kinec Doorbell buon + 230V Receiver + Mobile Receiver + 3M Industrial tape

PARTS & BUTTONS

Kinec Doorbell buon

A: Doorbell buon

INSTALLING AND PAIRING THE KINETIC DOORBELL BUTTON

You can aach the Kinec Doorbell Buon to any surface using the 3M Industrial tape or screw it into

the wall. Remove the back part of the Doorbell Buon and mount 2 screws into the foreseen area to

open the plasc. Hold the back part against the wall you wish to aach it to and, by using a pencil,

indicate where you need to drill the holes. Remove the back part and drill 2 holes where the indicaon

is visible. Insert 2 plugs into the holes, hold the back part over and screw it in place. To nish, place the

front of the Doorbell buon on the back part unl it clicks in place.

You can pair mulple (oponally available on www.mrhandsfree.com) with the receivers. Simply press

the Tone-Selecon (C, G) on the 230 Receiver or the Mobile receiver for 5 seconds unl you hear a

sound nocaon. Press the doorbell-buon (A) and you will hear another sound nocaon. Aer 10

seconds, you will hear another sound nocaon. Your devices are now paired.

INSTALLING AND PAIRING THE 230V RECEIVER

You can plug the 230V receiver into any plug desired in your house, the pairing for your set has already

been done during producon.

To pair an extra 230V receiver with your doorbell buon (oponally available on www.mrhandsfree.com),

press the Tone Selecon buon (C) for 5 seconds unl you hear a sound nocaon. Press the Kinec

Doorbell Buon (A) and you will hear another sound nocaon. Aer 10 seconds, you will hear

another sound nocaon. Your devices are now paired.

INSTALLING AND PAIRING THE MOBILE RECEIVER

Before installing the Mobile receiver, insert 3x AA Alkaline baeries into the Baery Compartment (F).

Press it lightly and slide it down to open the compartment. Insert 3 AA Alkaline baeries according to

the visible scheme and close the lid again by sliding it in place unl you hear a click. You can put and

take the Mobile receiver anywhere in your house (up to 150m), the pairing for your set has already

been done during producon.

To pair an extra Mobile receiver with your doorbell buon (oponally available on www.mrhandsfree.com),

press the Tone Selecon Buon (G) for 5 seconds unl you hear a sound nocaon. Press the kinec

doorbell buon (A) and you will hear another sound nocaon. Aer 10 seconds, you will hear

another sound nocaon. Your devices are now paired.

SELECTING A RINGTONE AND ADJUSTING THE VOLUME

To select a ringtone on either the 230V receiver or the Mobile receiver, press the Tone selecon buon

of the device (C, G) unl you hear the ringtone you wish to select.

Note: If you wish to have the same ringtone on both devices, you have to set it for each device separately.

Note: When mulple Kinec Doorbell Buons are paired to your device, it is not possible to have a

separate sound for each doorbell buon.

To adjust the volume on either the 230V receiver or the Mobile receiver, rst, press the Tone selecon

buon of the device (C, G) to hear a tune and press the Volume buon of the device (D, H) to select

the desired volume.

SUPPORT

For more informaon, technical quesons and return requests concerning this product, you should

contact support@mrhandsfree.com.

WARRANTY

Mr Handsfree is a registered trademark of TE-Group NV. The mr Handsfree brand stands for superior

product quality and outstanding customer service. That is why mr Handsfree warrants this product

against all defects in material and workmanship for a period of two (2) years from the date of original

purchase of the product. The condions of this guarantee and the extent of responsibility of mr

Handsfree under this guarantee can be downloaded from our website: www.mrhandsfree.com.

230V Receiver

B: Power Plug

C: Tone selecon-buon

D: Volume

Mobile Receiver

E: ON / OFF switch

F: Baery Compartment

G: Tone selecon-buon

H: Volume

WIRELESS DOORBELL SET

Hereby, Par la présente,

Company:

Entreprise:

Address:

Adresse:

declare that the following equipment: déclare que le disposif suivant :

Product name: Nom du produit:

Product type: Type de produit:

Joseph van Oosterum, CEO TE-Group NV

Authorised signature

TE-Group NV

Kapelsestraat 61, 2950 Kapellen, Belgium

mr. Handsfree i-Bell Set KB300

Wireless Kinec Doorbell & Receivers

2011/65/EC, 2014/30/EC & 2014/35/EC. Conformity is guaranteed by the CE-symbol.

versions valid in September 2016.

versions valides en Septembre 2016.

EN301489-1 V1.9.2 (2011)

EN301489-3 V1.6.1 (2013)

EN60065:2014

EN300220-1 V2.4.1 (2015)

EN300220-2 V2.4.1 (2015)

EN301489-1 V1.9.2 (2011)

EN301489-3 V1.6.1 (2013)

EN62479:2010

DECLARATION OF CONFORMITY

MrHandsfree iBell Set KB300

11-2016/V1

if the doorbell button is installed outside on a metallic surface about 10 meters from the door of the house, the receiver being approximately 5 meters inside the house, is the system adapted for this configuration? Submitted on 16-12-2020 at 16:14
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Mr Handsfree KB300 iBell Set in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,6 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Mr Handsfree KB300 iBell Set Manual

Product: