5034
67
Zoom out
Zoom in
Previous page
1/72
Next page
67
Time
Press the Up or Down button until the relevant display light illuminates. The Time function is
displayed. If you want to change the value, press Enter/Reset until Time is displ
ayed and
press Up or Down to select the desired value.
Count Up
If the time has not been preset, the display will automatically count up the seconds (00:00
-
99:59).
Count down
If the time has been preset to 1:00
-
99:00, the computer will automatically count
down from
the value set. When the target value is reached, the display will give a signal.
Speed
Use the Up or Down buttons or Speed in the display. The display shows the current speed.
The speed is given in 0.00
-
99.9 km/hr or mile/hr).
Distance
Press the Up or Down button until the DIST. light illuminates. The display shows the workout
distance. Press Enter/Reset until Dist. if you want to enter the distance manually. Use the Up
or Down buttons to set the distance.
Count up:
If the distance has not been
preset, the display will automatically count up the kilometres or
miles (0.1
-
999.0 km or miles).
Count down:
If the distance has been preset to 1.0
-
999.0 km or miles, the computer will automatically
count down from the value set. When the target value is r
eached, the display will give a
signal.
Calories
Press the Up or Down button until the Cal. light illuminates. The display shows the calories
burned. If you want to set the value, press Enter/Reset until Cal is displayed and press Up or
Down to select the
desired value.
Count up:
If the calories have not been preset, the display will automatically count up the calories (1.0
-
999.0 calories)
Count down:
If the calories have been preset to 1.0
-
999.0 calories, the computer will automatically count
down fr
om the value set. When the target value is reached, the display will give a signal.
Pulse
Press the Up or Down button until the Pulse light illuminates. Your heart rate is displayed in heartbeats per
minute. If you want to set the value, press Enter/Reset
until T.H.R. is selected and press Up or Down to set
the desired value.
Pulse limit:
If the maximum pulse limit has been preset to a value between 60 and 220, the computer will
register your heart rate. When the target value is reached, the display will g
ive a signal.
When measuring pulse with an ear lobe sensor, make sure you rub your ear lobe to improve
circulation. Attach the sensor wire to your collar with the clip. This prevents the sensor from
moving during the workout.
You can also measure the pulse
by touching the two handle bar sensors.
67


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MPF Blackbeat at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MPF Blackbeat in the language / languages: Dutch as an attachment in your email.

The manual is 2,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info