Manual Morso 1010 (page 30 of 32) (English, Danish)

744293

Zoom out

Zoom in

1/32

DK ENG

Reasons for premature wear of internal parts:

- Stove being used/red too vigorously.

- Too much air passing through the bottom grate.

- Use of excessively dry wood (wood from old furnitures)

- Excessive debris collection on bae plate or inner reback (see section on cleaning)

- Ash level too high in the ash pan (see section on ash)

Vermiculite rebricks

It should be expected that at sometime the Vermiculite rebricks will show some signs

of cracking in its surface; however this is regarding as natural and will not alter the

overall function.

Gaskets

The rope gaskets in the door will need regular inspection in order to ensure and maintain

full control of your stove’s burning rate; over time the rope gaskets will harden and will be-

come less airtight, at this point you will need to remove and replace with new. Use only the

genuine Morsø gasket kit, which comes with detailed replacement instructions.

NOTE: Normal wear components (inner parts) are not covered by Morsø’s extended

guarantee

Maintenance products (Spare Parts, Glass Cleaner, Paint, Gasket Kit, etc) are all available from

your authorised Morsø dealer.

3.3 Cleaning the stove

During normal use and sweeping of your stove and chimney, a layer of ash, soot or debris can

form, particularly on the top of the bae plate or inner reback. Any deposits allowed to build-

up over time will have an insulating eect on these parts, thus restricting expansion; this ultim-

ately result in a shorter lifespan. The chrome-iron access door 1464 can easily be removed from

the stove and should be regularly checked for debris and cleaned. You must ensure that your

chimney sweep removes all soot and debris from the stove after the sweeping process.

Your chimney should be swept at least once a year; however a regular inspection of your stove-

pipe and chimney will determine whether a more frequent approach should be adopted.

Ash

As noted above, there should be circa 1 cm insulating layer of ash on top of the grate when

burning wood only in order to achieve a high combustion temperature. Excess ash can be

removed by pushing the ash into the ash pan below.

Be sure to empty the ash pan before it gets completely full; if the ash level reaches the under-

side of the grate, air ow through the grate will be restricted and will lead to over-heating and

premature wear of the grate parts.

When emptying the ash pan always dump the waste ash into a metal container (dustbin)

where it can fully cool before being taken away by your refuse collector. Ash from a wood-

burning stove does not benet your garden as fertiliser.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Morso 1010 in the language / languages: English, Danish as an attachment in your email.

The manual is 0,5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Morso 1010 Manual

Product: