323971
7
Zoom out
Zoom in
Previous page
1/8
Next page
77
6 The indicator light remains ‘on
when the selected temperature
is attained.
7 Disconnect the iron from the
mains supply outlet.
8 Hold the iron horizontally over a
sink.
9 Press and hold down the
Self-Cleaning button
ÂÂ
.
10 Steam and boiling hot water will
drain from the holes in the
soleplate, washing away the
scale and minerals that have
built up inside the Steam
Chamber.
11 Gently move the iron back and
forth until the water tank is
empty.
12 When cleaning is complete,
release the Self-Cleaning button
ÂÂ
.
13 Rest your steam iron back on it’s
heel and allow to fully cool
down.
14 Wipe the soleplate with a cold,
damp cloth.
After this cleaning operation,
empty out any remaining water.
WARNING: Keep hands and
body away from the hot water.
WARNING: Do not attempt to
descale the soleplate with
descaling products.
To clean a ceramic
coated soleplate
In the unlikely event of any
man-made fibre fusing to the
soleplate, set the iron at the
MAX position and pass it over a
clean piece of cotton which will
draw the deposit off the surface.
Do not use scouring powder or
solution as this could cause
damage to the coating.
To clean the exterior
Allow the iron to cool and wipe
over with a damp cloth and mild
detergent, then wipe with a dry
cloth.
Emptying and
storing
HH
When you have finished ironing,
unplug your iron. Ensure that the
variable steam control is set at
the ‘0’ position, lift up the filler
cap and empty any remaining
water out of the filling hole. Do
not store in the box, but in an
upright position, so that any
drops of water remaining cannot
leak out and discolour the
soleplate.
Important: The flex can be
damaged if wound too tightly
around the iron after use. Make
a loose loop with the flex and
wrap it around the iron. The iron
must be cool before winding the
flex and storing on it’s heel
II
.
Helpline
If you have any difficulty with
your appliance, do not hesitate
to call us.
We are more likely to be able to
resolve any issues than the store
from where you bought it.
Please have the following
information ready to enable our
staff to deal with your query
quickly:
Name of the product.
Model number as shown on
the underside of the
appliance.
Serial number as shown on
underside of the appliance.
UK Helpline 0845 077 7700
Ireland Helpline 1800 409 119
HH
II
GG
RN40740MUK rev2 4/12/07 16:37 Page 7
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Morphy Richards 40740 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Morphy Richards 40740 in the language / languages: English as an attachment in your email.

The manual is 0,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info