Manual Morco FEB-24ED (page 20 of 20) (English)

646340

Zoom out

Zoom in

1/20

N51J057F0 - C451J5602 - 20100804

For more detailed servicing information, workshop manuals, technical advice, spare

parts, product training, please phone us on 01482 325456 or contact us at the

address below.

MORCO PRODUCTS LTD

Morco House, Riverview Road, Beverley, East Yorkshire HU17 0LD

TEL:01482 325456 FAX:01482 212869 EMAIL: sales@morcoproducts.co.uk

WEBSITE: www.morcoproducts.co.uk

CODE FAULT

Lack of gas or ignition problems

Flame supervision failure

Burner on but ame indicator o

Minimum burner pressure too low

Air pressure switch failure / Fan failure

Water Pressure below 0.7 bar

Hi limit thermostat failure

Printed circuit board failure

Flame supervision failure, indicator light on, burner

o

Control panel failure

F10

Gas valve control circuit failure

F12

Central Heating return thermistor failure

F13

Central heating ow thermistor failure

The boiler is guaranteed against manufacturing defects for a period of one year from

the date of rst commissioning. However the guarantee is subject to proof of

commissioning in accordance with the gas safety (Instalation and Use) act. 1998.

The guarantee does NOT cover the following issues:

1.- Frost damage to any part of the boiler containing water during freezing condi-

tions.

2.- The removal of sludge or hard water scale due to lack of antifreeze/inhibitor or

water quality.

3.- Damage to electronics caused by a defective electrical supply.

4.- Damage or failure caused by insect contamination or blocked water lters.

5.- Loss od pressure within the heating system not caused directly by the boiler.

6.- Incorrect operation of the boiler caused by defective outlets such as thermostat-

ic mixers or mono block mixer taps.

7.- Damage caused by unauthaurised modications to the boiler from original spec-

ications.

9.- FAULT CODE TABLE

10.- WARRANTY CONDITIONS

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Morco FEB-24ED in the language / languages: English as an attachment in your email.

The manual is 3,48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Morco FEB-24ED Manual

Product: