646346
5
Zoom out
Zoom in
Previous page
1/20
Next page
Selecting the required power
Turn the power selector (1) to obtain the desired power.
MAX position indicates 100% power.
MIN position indicates 50% power.
Selecting the hot water temperature
Turn the water temperature dial (2) to obtain the desired
temperature.
MAX position indicates the maximum temperature (minimum flow).
MIN position indicates the minimum temperature (maximum flow).
IMPORTANT: This heater is not thermostatic.
Note: It is advisable to adjust both the power and the water temperature to the
minimum value necessary to cover your requirements. This will save energy and
prolong the life of the appliance, reducing scale deposits on the heat exchanger.
Switching off the water heater
When the hot water tap is turned off, the heater will stop automatically.
To switch off the heater completely, press the ON-OFF button (3).
IMPORTANT: When the heater is switched on for the first time, or if it has
not been used for a certain time, or when a new gas bottle is installed, the
appliance may fail to ignite due to the presence of air in the gas pipes. If
this happens, the heater will ‘LOCK OUT’ and the red LED (4) will be
displayed.
Occasionally, the heater may fail to ignite due to excessively windy
conditions or other adverse atmospheric conditions, causing ‘LOCKOUT’.
Insufficient gas pressure (faulty regulator) or fluctuations in voltage may
also cause ‘LOCKOUT’.
To RESET the heater press the ON-OFF button to switch off then depress the
ON-OFF button to restart. The red LED should now be off and the heater
should ignite when the hot tap is opened.
If the heater locks out persistently, call your installer or MORCO on 01482
325456 for details of your nearest service agent.
Combustion product removal control device (Air pressure switch)
IMPORTANT: The user must not interfere in any way with this device. Under no cir-
cumstances may it be disconnected, modified or replaced by a different part.
If the flue becomes blocked for any reason, or it is contaminated the heater
will ‘LOCKOUT’. It will be impossible to re-start the heater without fixing the
problem. You should call your installer or phone MORCO on 01482 325456.
5
USER
5


Need help? Post your question in this forum.

Forumrules
1

Forum

morco-f-11e

Reset search

  • Bonjour,
    Mon chauffe eau morco f11e fonctionne mais ne produit pas d'eau chaude Submitted on 18-4-2023 at 20:54

    Reply Report abuse
  • Notre chauffe eau morco 11 fonctionne mais ne produit pas d eau chaude Submitted on 18-4-2023 at 20:51

    Reply Report abuse
  • Pourquoi mon chauffe eau morco f 11e ne se déclenche pas est e un problème, d électrode Submitted on 2-8-2022 at 14:27

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Morco F-11E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Morco F-11E in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Morco F-11E

Morco F-11E Additional guide - English - 1 pages

Morco F-11E User Manual - Dutch - 18 pages

Morco F-11E User Manual - French - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info