481109
24
Zoom out
Zoom in
Previous page
1/51
Next page
24
English
AFTER USE
Window attachment – Push the window attachment onto the head until you hear it click into
place. You can now fit the window attachment to the concentration nozzle by pushing it into
place, and remove it by pulling it off after the work has been completed. Perfect for cleaning
windows, mirrors, ceramic tiles and surfaces and other non-porous, smooth surfaces. Apply the
steam evenly to the glass surface from a distance of about 20 cm. Then switch the steam off and
wipe the moisture off the glass from top to bottom in strips using the rubber squeegee. Wipe
the rubber squeegee and the lower edge of the window dry after every strip.
Attention: glass surfaces can be shattered by the sudden application of excessive heat. Before
cleaning such glass surfaces with the steam-cleaner, warm them up by applying steam to the
surface from a distance of 20-25 cm. Continue by applying steam from a distance of 10-15 cm.
Remove the plug from the socket before fitting or changing accessories. The accessories will
become hot during use – allow them to cool down before replacement.
Switch the cleaner off and remove the plug from the socket. Wait until the cleaner has cooled
down completely. Empty the water tank. Allow the inside of the water tank to dry out before
replacing the lid. Store the unit in a dry area safely out of the reach of children.
Attention: before opening the lid to empty the tank, release the steam pressure by pressing the
steam trigger on the steam gun, or allow the cleaner to cool down completely.
POWER CABLE WINDING-SYSTEM (Illustration 12)
(located at the bottom of the device)
To wind up the power cable at the bottom of the device, you must press the middle of the round
circle at the bottom of the device. (A) Then lift it up and turn it 180 degrees. Underneath you will
notice a small lever. (B) Slide this down, in the direction of the wheels. (C) With both edges
firmly in position you will be able to fully wind the power cord around this. To restore everything
to the original state you repeat the above-mentioned steps in reverse order.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Montiss CSC5623M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Montiss CSC5623M in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info