718515

Montana X2 Manual

7
Zoom out
Zoom in
Previous page
1/8
Next page
P
ARTS ITEM
1-Motor
2-Speed knob
3
-Electrical lead
4-Jug
5-Blade
6
-Cover + Closure
7
-Filter
8-Push buttons: (3 x) Pulse, Ice
And Smoothie
I
nstallation
1. Clean the measuring cup,
cover and jar (except main
b
ody) and so on before first
using.
2. To make sure the unit is
turned off and not to connect
before installation.
3. First ring the jar sealed ring
into blade base, then enclose
the blade base into jar, last
rock the jar slightly causing it
to lock into place.
4. Fit the blender glass jar onto
the main body, and turn it
slightly in a clockwise so it
locks with the motor section.
Fill the jug with the desired
foods. Please ensure the water
not spill over from cup.
(Maximal water capacity can
not exceed 1500 ml)
DO NOT USE THE UNIT WITHOUT ANY MATERIAL INSIDE.
5. Put the cover on top of the jar and push it down. Insert the closure into the cover and turn till it locks into
place.
6. Place the measuring cup on the center of cover, anticlockwise rock the measuring cup slightly.
OPERATION
1. Connect the power. Please ensure the knob turn to “OFF” before connect the power. The blue light of the knob
will light for one second, which means power well connected.
2. This unit has safety design. It does not work if the jar is not installed on main body properly.
3. Fill the jug with the desired foods.
4. Put the cover on top of the jar and fix it. Place the measuring cup on the center of cover, anticlockwise rock the
measuring cup slightly.
5. Put the jug on main body upper base.
6. Turn the knob to position “On”, blue light around the knob is on.
7. The functions of“SMOOTHIE”milk shake“ICE”“PULSE”are available; Press one of the buttons. That
button will light and the machine will work in corresponding mode.
8. For choosing the speed, please turn the knob between “MIN”(lowest speed) and “MAX”(highest speed) to
choose the required speed.
9. Please stop working after operating continuous for 2 minutes.
Caution:
• Over-filled can block the operation, please turn off the unit and do not connect the plug, take out some of
material, then operating.
• Do not use the unit continuously more than 2 minutes.
MontAna
®
X2
Motor
Speed knob
Electrical lead
J
ug
B
lade
Cover + Closure
Filter
Push buttons
To use as sap centrifuge
Put the peeled pieces of fruit in the filter (7). The
pulp stays in the filter and the juice will flow in the
Jug.
gebruiksaanwijzing Montata blender x2_Opmaak 1 13-11-14 12:52 Pagina 7
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Montana X2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Montana X2 in the language / languages: English, Dutch as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info