769166
9
Zoom out
Zoom in
Previous page
1/11
Next page
1716
or to the lying position, pull the handle in the back part of the backrest
upwards, select the required position and release the handle. The back-
rest is equipped with a spring-loaded auto-lock mechanism that does
not require the handle to be lifted when lifting the backrest from lying
to sitting position.
9. Do not allow the child to stand on the seat as it may damage the
stability of the stroller and cause the stroller to fall down.
10. Do not carry the pram holding the hood, upper edge of the back-
rest, footrest or the element creating the pram version. Do not use the
pram on steps or leave the pram with the child on uneven surfaces
(even with the brake on) as it may go down. Carrying the pram up or
down the steps, placing the pram to the bus, etc. should be carried out
with the aid of another person. The person holding the pram handle
tube passes the obstacle first while holding the pram handle tube, and
the person holding the other end of the pram should grasp the pram
by a stable element such as a fixed upright of the frame. When carrying
the pram downstairs the person who is helping comes down first.
11. When the pram is not in use, the brake should always be engaged.
Use of the brake requires lowering the brake level and checking the
effectiveness of the brake. Before moving the pram, ensure that the
pram wheels are not locked; moving the pram with locked wheels
could cause damage to locking elements.
12. When passing obstacles at of varying levels (e.g. high doorsteps),
bring both wheels closer together (of the same axle) simultaneously
pressing the handle tube down when passing the obstacle with front
wheels. When passing higher obstacles (e.g. access to curbs of a side-
walk), place the front wheels of the pram slightly above the level of the
obstacle surface simultaneously by pressing the handle tube down and
pulling it towards the body, move the rear wheel closer to the obstacle,
lower the front wheels and move the rear wheels over the obstacle by
lifting the pram up. Any collision with hard objects or surfaces may
damage (deform) elements connecting the frame or damage frame el-
ements causing a lack of proper alignment.
13. The load of the basket fastened to the pram frame should not ex-
ceed 2 kg. Accessible load of the bag, if is equipped, hung on the pram
handle is 1.5 kg. Pockets of the pram are for decorative purposes only,
no objects of total weight exceeding 0.15 kg should be placed within
each pocket or weight of 0.35 kg for all pockets.
14. Keep the pram elements clean. Dirt on the frame should be re-
moved with a damp sponge and then wiped with a dry cotton cloth.
Do not use caustic, sharp, or hard agents for cleaning as these may
be harmful to the pram elements (discolouration, scratches, etc.). It
is recommended to use cleaning agents appropriate for a particular
surface. In the case of any dirt on the pram cover, remove it with the
use of a damp sponge, adding a delicate cleaning agent. Avoid over
wetting the stroller seat, bottom of the carry cot, and bottom of addi-
tional sleeping bag (pram of changeable function) as this may cause
deformation of stringer ring elements.
15. To avoid weepings or smudges which may occur after rainfall, for
instance, secure the pram against over soaking by the use of rain cover
for the whole pram. It is recommended to protect the pram against the
effects of strong sunlight. The manufacturer cannot accept responsi-
bility for deterioration to the pram cover, which result from failure to
follow these recommendations.
16. Before mounting and dismounting the wheels, lift the locking
mechanism of the brake upwards (unblocked break). We recommend
that the pram axles be kept clean. Where prams are equipped with
wheels without bearings, pram axles should be kept lubricated with a
thick agent (cup grease, machine oil) to reduce friction on tube ends.
In models equipped with wheels with bearings, it is recommended to
blow with compressed air before to lubricate the axles with a lubricat-
ing agent e.g. WD40. In the case of inflating wheels, we recommend
that the inner tube pressure must be maintained at a constant level not
exceeding 0.6 at or of the value indicated on the wheel frame.
17. WARNING: Take care to keep clean the mechanism of the rear
brake using a compressed air gun and using lubricating agents such as
WD40, in order to avoid the hardening of the pedals and the breakage /
consumption of the brake discs.
18. WARNING: Accessories or spare parts that the manufacturer or
distributor has not approved must not be used.
ENEN
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Momon Tourinot at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Momon Tourinot in the language / languages: English, Italian as an attachment in your email.

The manual is 0,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info