493649
2
Zoom out
Zoom in
Previous page
1/17
Next page
EN-2
Preparation/SetUp
Preparation before using the network function
This projector is equipped with the network function to control and monitor the projector’s operations using a Web
browser and to send e-mail notification.
Before using the network function, perform the following three preparation steps.
(1) Setup of the application software “Projector-Control Device Installer”
(2) Setting of the IP address of the projector
*1
(3) Setting of password, display language, LAN control, and PJLink™ certification using telnet.
*1
When setting IP addresses for multiple projectors collectively or when setting an IP address for a ceiling-
mounted projector after installation, check and take a note of combination of the projectors and the hardware
addresses (MAC addresses) in advance. To check the hardware addresses (MAC addresses), perform step 2
on the page 5.
[Major functions]
Setting of the projector’s IP address
Setting of password, display language, and LAN control
PJLink™ certification setting (Telnet function)
Startup of the controlling / supervising tool (ProjectorView) using the Web browser
[System requirements]
Supported OS : Windows
®
2000, Windows
®
XP, Windows Vista
®
Microsoft
®
.NET Framework 2.0
*2
should be installed in Windows
®
2000 or Windows
®
XP.
Microsoft
®
.NET Framework 3.0
*3
should be installed in Windows Vista
®
.
CPU : Pentium II 233 MHz or higher
Memory : 128 MB or more
Free HDD space : 32 MB or more
Web browser : Internet Explorer Ver. 6.0
(Java Plug-in
*4
should be installed and JavaScript should be enabled.)
How to install Microsoft
®
.NET Framework Version 2.0, 3.0
*2
When using Windows
®
2000 or Windows
®
XP:
(1) Download .NET Framework Version 2.0 (file named “dotnetfx.exe”) from the download center on the
Microsoft
®
Web site (http://www.microsoft.com/downloads/).
(When the file is unavailable from the above-mentioned URL, search for .NET Framework using Windows
Update and access the download site found.)
(2) Execute the downloaded file named dotnetfx.exe.
*3
When using Windows Vista
®
:
(1) Download .NET Framework Version 3.0 (file named “dotnetfx3.exe”) from the download center on the
Microsoft
®
Web site (http://www.microsoft.com/downloads/).
(When the file is unavailable from the above-mentioned URL, search for .NET Framework using Windows
Update and access the download site found.)
(2) Execute the downloaded file named dotnetfx3.exe.
*4
How to install Java Plug-in
(1) Download JRE6 from the JAVA download center on the Sun Microsystems Web site (http://java.sun.com/
javase/downloads/index.jsp).
(When the file is unavailable from the above-mentioned URL, search for “JRE6 download” using a search
engine and access the download site found.)
(2) Execute the downloaded file.
(3) After the completion of the installation, select [Start] - [Control Panel] - [Java Plug-in] and disable the cache.
Microsoft, Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation •
in the United States and/or other countries.
Pentium is trademark or registered trademark of Intel Corporation or its subsidiaries in the United States and •
other countries.
The trademark of PJLink is trademark applied for registration or registered trademark in Japan, the United •
States, and other countries and areas.
Other brand or product names are trademarks or registered trademarks of their respective holders.•
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi WD3300U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi WD3300U in the language / languages: English as an attachment in your email.

The manual is 1,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Mitsubishi WD3300U

Mitsubishi WD3300U User Manual - English - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info