549860
32
Zoom out
Zoom in
Previous page
1/32
Next page
EN-32
11. Others
11.1. Troubleshooting
• Theprojectorcannotberecognized.
Theprojectormaynotberecognizedautomaticallyduetothesettingofrewall.Insuchcase,the
communicationof“ProjectorViewGlobal+”shouldberegisteredasanexceptiontotherewall.Forthe
setting of the fire wall, see the manual of the software that configures the fire wall.
• Operationbytheremotecontrollercannotbeproperlyperformed.
The operation may not be performed until the last operation has been completed. In such case, wait for a
while and perform the operation again. In addition, confirm whether the network setting such as IP address is
correct.
• Applicationbecomes“Noreply.
Since it may take time for processing of the automatic status acquisition, the application can not be operated
during that time, and “No reply” may be displayed. Wait for a while until the processing has been ended.
• Applicationcannotbeoperatedsometimes.
The application cannot be operated during the acquisition of the projector status. When the main power of the
projector is off or projectors not actually connected are registered, the projector status acquisition may take
longer time to complete because it waits until time out. In this case, you can reduce the acquisition time by
deleting unnecessary registered projectors.
• Projectorscannotbecontrolled.Projectorstatusisn’tdisplayed.
Restarttheapplication.Iftheproblempersists,“InitializeNetworkConguration”onthesetupscreenortry
“7 factory defaults” using a Telnet connection. In that case, you need to make settings of the projector again,
because they are reset to the default values.
11.2. Supported Projectors
• “Telnet”isavailableinthefollowingtypesofprojectors.Fordetails,see“LANControlUtility”UserManual
included with the projector.
• “VisualPA2”isnotavailableinthefollowingtypesofprojectors.
• IfyouuseProjectorViewinthefollowingtypesofprojectors,see“LANControlUtility”UserManualincluded
with the projector.
XD2000U, XD1000U, WD2000, XL550U, XL650U, HL650U, WL639U, XL1550U, XL2550U, WL2650U,
HL2750U, MH2850U, FL7000U, WL6700U, XL6600U, XL6500U, FL7000U(BL), FL7000LU, WL6700LU,
XL6600LU, XL6500LU, HD8000, FL6900U, XD3200U, WD3300U, XD3500U, XD221U, XD221U-ST,
XD2000U(K), WD2000(K), XL550U(K), XL650U(K), HL650U(K), WL639U(K), XL1550U(K), XL2550U(K),
WL2650U(K), FL7000U(K), WL6700U(K), XL6600U(K), XL6500U(K), XD221U(K)
Ver.1.0
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi UD8900U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi UD8900U in the language / languages: English as an attachment in your email.

The manual is 0,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Mitsubishi UD8900U

Mitsubishi UD8900U User Manual - English - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info