472293
24
Zoom out
Zoom in
Previous page
1/41
Next page
4746
WIRELESS/REMOTE FLASH MODE
6. Use test flash to check the 5600HS (D) flash.
• The method used for test flash differs with the camera used (eg.
press the AE lock button, or spot AE lock button). See the camera
manual for details.
• If the test flash doesn’t fire, change the position of the camera, flash,
and subject, or point the wireless/remote control-signal receiver
towards the camera.
7. Check again that the built-in flash and the 5600HS (D) are
fully charged, and press the shutter-release button to
take the photo.
[1]-2 Ratio-Flash Control Using The Built-In Flash
The built-in flash and 5600HS (D) may be controlled to a flash
intensity of 1 and 2 respectively. See photo on page 40.
The method used differs with the camera. See the camera manual
for details.
• Set shutter speed to 1/60 of a second or less (low shutter speed).
Wireless high-speed sync photography cannot be used.
• Ratio-flash control cannot be used with the Maxxum QTsi, 300si, and
Dynax 303si, 300si.
[1]-1 Using The Built-In Flash
1. Attach the 5600HS (D) to the
camera and switch the flash
and camera power supplies on.
2. Set the camera to wireless
flash.
• The method used for the setting
varies with the camera. See the cam-
era manual for details.
• When the camera is set to wireless
the 5600HS (D) is also set to wire-
less automatically, and WL is dis-
played on the data panel.
3. Remove the 5600HS (D) from
the camera and raise the built-
in flash.
4. Set up the camera and the
5600HS (D).
• See page 43 for details.
5. Check that the built-in flash
and 5600HS (D) are fully
charged.
is lit in the viewfinder when the
built-in flash is fully charged.
• The AF illuminator on the front blinks,
and on the rear is lit, when the
5600 HS (D) is fully charged.
WIRELESS FLASH
[1]-3 Setting Wireless/Remote Flash By Flash Only
If you keep using the same camera and the flash combination with-
out changing the wireless channel, it will not be necessary to attach
the flash to the camera the next time.
• Camera’s setting : See the camera manual for detail.
• 5600HS (D)’s setting : Follow the step 1 to 5 in page 49.
• This procedure is not available with the Maxxum QTsi, 400si, 300si
and the Dynax 500siSuper, 500si, 303si, 300si.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Minolta Maxxum 5600HS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Minolta Maxxum 5600HS in the language / languages: English as an attachment in your email.

The manual is 1,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info