3534
MODE AND SELECT BUTTONS
The mode, select, +, and - buttons
are used to select the functions
described on the next page.
The functions are selected with the following basic procedure. See
the relevant pages for details.
1. Select the major item with the mode button.
2. Select the minor item with the select button.
3. Make the setting with the + and - buttons.
4. Press the select button* repeatedly until blinking stops.
* Also possible with the mode button or flash on/off button.
• Pressing the + and -buttons simultaneously for three seconds restores
the initial settings (p. 64).
• Multiple settings which are prohibited are not displayed. For example,
as HSS cannot be selected with RATIO set to or , HSS is
not displayed when the select button is pressed if RATIO is on.
Figures in brackets after each item indicate the relevant page.
Selected with
mode button
Selected with
select button
Selected with + and - buttons
(items in Italics are initial settings)
HSS (38)
ON
, OFF
WL (40)
OFF
, ON, CONTROL
RATIO
OFF
, ,
LEVEL (58)
1/1
, 1/2, 1/4, 1/8, 1/16, 1/32
HSS (38)
ON,
OFF
WL (40)
OFF
, ON
LEVEL (58)
1/1
, 1/2, 1/4, 1/8, 1/16, 1/32
Hz
100, 50, 40, 30, 20, 10,
9, 8, 7, 6,
5
, 4, 3, 2
TIME
- - (unlimited), 40, 35, 30, 25, 20, 15,
10
, 9, 8, 7, 6, 5, 4, 3, 2
LEVEL
1/8, 1/16,
1/32
TTL (36)
M (36)
MULTI (60)
MODE/SELECT BUTTON
