727618
29
Zoom out
Zoom in
Previous page
1/32
Next page
-Replace the brewing unit by turning it into the right posi-
tion (the outlet tube facing downwards and to the front),
insert the brewing unit into the guide grooves and push it
completely into the coffee machine.
-Push the coffee grounds container back into the
appliance and push the outlet unit into the upper posi-
tion. Close the door.
The cleaning programme is complete when the “ Clea-
ning programme” display goes out.
Removethewatertank(G)andllitwithminimum1L
fresh water.
Replace the water tank.
The coffee machine is now ready for operation again and
returns to the last selected coffee mode.
CAUTION:
Residues of descaler may cause damage to the brewing
unit in the long run!
It is imperative that you rinse the brewing unit thoroughly
after every descaling process.
Anomalies and repair
- Take the appliance to an authorised technical support
service if product is damaged or other problems arise.
Do not attempt to disassemble or repair the appliance
yourself as this may be dangerous.
- If any anomaly is detected, check the following table:
CAUSE SOLUTION
Brewing unit
soiled.
Remove the brewing
unit and rinse it
thoroughly with
owingwater.
Brewing unit
soiled.
Insert the brewing
unit into the
appliance and close
the door.
Grinding
nenessis
settooneor
coffee powder
usedistoone
Set a coarse grinding
nenessorusediffe-
rent, coarser coffee
powder.
Communication
failure
If one of these
messages are
displayed, switch the
device off.
Switch back on again
after a cooling down
phase of approx. 30
minutes.
If the message is
displayed again, an
error has occurred
that may need a
technical evaluation.
Input voltage
error
Main switch
blocked
Coffee
temperature is
incorrect
Brewing unit
is blocked
(technical
reason).
Use the splined
opening on the
measuring spoon to
open the back of the
brewing unit with the
splined journal
(min.3 turns)
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Minimoka CM-4758 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Minimoka CM-4758 in the language / languages: English, Spanish as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info