554049
54
Zoom out
Zoom in
Previous page
1/56
Next page
Programmable functions
54
Adjusting the dryer's electron‐
ics for very soft water
This setting should only be al‐
tered if the water is so soft that it is
likely to cause the electronics which
sense residual moisture in the laun‐
dry to give false readings.
Important
If the dryer is installed in an area with
very soft water, you should contact
your local water supplier for information
and advice regarding water hardness
and water conductivity. If the water
conductivity is less than 150 μS, the fol‐
lowing setting will need to be activated.
Only activate this setting if these
conditions are present. Otherwise
drying results will be unsatisfactory.
Follow steps (,, ...) to pro‐
gramme and store in memory.
Before you begin, ensure that:
The tumble dryer is switched off.
The door is closed.
The programme selector is pointing
to Finish.
Press Start and keep it pressed in
whilst carrying out steps -.
Switch the dryer on.
Wait until the indicator light for the
Start button lights up constantly . . .
. . . and then release the Start but‐
ton.
Turn the programme selector to Gen‐
tle smoothing.
The Empty container indicator light will
flash on and off slowly once and then
on and off quickly twice.
The option selected will be displayed
by a number which will alternate with
.
Factory default setting
Adjusted for very soft water (with
low conductivity)
(The Clean out airways indicator light
will also flash once)
Pressing the Start button switches
between the options.
Switch the dryer off.
The setting you have selected is now
stored in memory. You can change it
again at any time.
To check the setting:
Carry out steps -.
Switch the dryer off after checking.
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Miele T 8164 WP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Miele T 8164 WP in the language / languages: English as an attachment in your email.

The manual is 1,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Miele T 8164 WP

Miele T 8164 WP User Manual - German - 56 pages

Miele T 8164 WP User Manual - Dutch - 56 pages

Miele T 8164 WP User Manual - French - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info