441707
62
Zoom out
Zoom in
Previous page
1/80
Next page
To run the descaling
programme
Maintenance
qrHI J L n
m
C
^
Touch the right arrow sensor until
"Maintenance" is highlighted, and
confirm with OK, or,
^
If the machine is switched off, touch
the OK sensor whilst the machine is
switched off.
^
Select "Descale" and touch the OK
sensor.
^ Select "Start" and touch the OK
sensor.
The display will guide you through the
whole procedure. Please follow the
instructions to, for example, empty the
drip tray, fill the water container etc.
If the machine has already heated
up, it will cool down for approx.
10 minutes before starting to run
the descaling programme.
The descaling programme cannot
be cancelled once the OK sensor
has been touched. The programme
has to be completed through to the
end. This is a safety measure to
ensure that the machine is fully
descaled, and is important for the
long-term protection of the machine
and to ensure it functions correctly.
To dissolve the descaling tablets
^
take the water container out and fill it
to the k mark with lukewarm water.
(Do not use less water than this
because this would cause the
descaling programme to finish before
it has been completed properly).
^
Drop 2 descaling tablets in the
water. Allow the tablets to dissolve
fully before shutting the lid and
putting the water container back in
the machine.
During the descaling programme, water
containing descaling agent will run out
of the hot water and the central spouts.
This is followed by an activation period
before a little more descaling agent is
dispensed.
^ When a message asking you to fill
the water container with fresh
water appears, you should remove
the container and rinse it out
thoroughly with clean water. Make
sure all traces of descaling agent are
removed, and then fill it up to the k
mark with clean tap water.
Water will flow out of the spouts during
the rinsing process. Because the inside
of the machine is also cleaned during
this process you will be prompted to
Empty the drip tray at the end.
When Programme finished appears in
the display,
^
touch the OK sensor.
The descaling programme is finished
and the machine can be used for
making drinks again.
Descaling the machine
62
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Miele CVA 5068 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Miele CVA 5068 in the language / languages: English as an attachment in your email.

The manual is 1,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Miele CVA 5068

Miele CVA 5068 Quick start guide - English - 8 pages

Miele CVA 5068 User Manual - German - 76 pages

Miele CVA 5068 User Manual - Dutch - 60 pages

Miele CVA 5068 User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info