111179
67
Zoom out
Zoom in
Previous page
1/80
Next page
... water or milk stops flowing whilst
programming in the amount to
dispense.
The flow stops automatically when the
maximum fill quantity is reached. The
maximum quantity is stored in memory.
If there was not enough water or milk in
the water container or milk flask, the
amount that has been dispensed will
not be saved to memory.
^
Fill the water container or the milk
flask, and repeat the process to
programme in the amount.
... there is water in the waste
container.
This is not a fault. The water is left over
from the brewing and cleaning process.
... there is a lot of residual "coffee
water" in the waste container.
If the slide control for the grinder is set
to too coarse a setting, too much
residual "coffee water" can be left in the
waste container.
^
Set the grinder on a slightly finer
setting (see "Setting the coffee
grinder").
^
If necessary, adjust the amount of
coffee (see "Settings: customising
your machine - Setting the amount of
coffee").
Is the central spout connector cap
positioned correctly (See "Guide to the
machine" - "Interior view")?
^
Lubricate the cap of the central spout
connector with the silicone grease
supplied.
^
If the cap is faulty, replace it with the
spare part supplied.
... the descaling programme was
started by mistake.
The descaling programme cannot be
cancelled once you have touched the
OK sensor. The programme has to be
completed through to the end. This is a
safety measure to ensure that the
machine is fully descaled, and is
important for the long-term protection of
the machine and to ensure it functions
correctly.
^ Descale the machine (see "Descaling
the machine").
... the coffee machine makes loud
noises during the descaling
programme.
During the descaling programme you
will hear loud noises as water is flushed
through the machine under high
pressure. These are no cause for
concern.
... the heating-up time is getting
longer, the amount of water coming
through is incorrect and the machine
is not performing properly.
The machine needs descaling.
^
Descale the machine (see "Descaling
the machine").
Problem solving guide
67
67


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Miele CVA 5060 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Miele CVA 5060 in the language / languages: English as an attachment in your email.

The manual is 1,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Miele CVA 5060

Miele CVA 5060 Quick start guide - English - 8 pages

Miele CVA 5060 User Manual - German - 76 pages

Miele CVA 5060 User Manual - Dutch - 60 pages

Miele CVA 5060 User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info