111268
30
Zoom out
Zoom in
Previous page
1/72
Next page
Safety (activating the System
lock)
The machine can be locked to ensure
that it is not operated by unsupervised
children or persons who are
unacquainted with the operating
instructions.
When the machine is locked, the
"Switch on at" setting of the timer will
not work.
To activate or deactivate the System
^ Select "Settings F" from the Main
menu, and then touch the OK sensor.
^ Select "Safety" with the arrow sensors
and touch the OK sensor.
^ Use an arrow sensor to highlight
"System lock" and then touch the OK
sensor.
^ Select "On" with the arrow sensors
and touch the OK sensor.
The machine will now lock as soon as it
is switched off and cannot be switched
on again. If a sensor is touched, a
message and a locked padlock X will
appear in the display.
To deactivate the System lock,
proceed as above, but select "Off".
To override the System lock
^
Touch the OK sensor for about 3
seconds.
The machine is now temporarily
unlocked and can be used to make
drinks again. It locks itself as soon as
the machine is switched off.
Setting the water hardness
For trouble-free operation of the coffee
machine, and to ensure that the
descaling reminder appears in the
display at the appropriate time, it is
important to set the water hardness
level. The water hardness level
indicates how much calcium is
dissolved in the water. The higher the
calcium content, the harder the water,
and the harder the water, the more
often the machine will need to be
descaled.
The machine measures the amount of
water which has been taken in
(including the amount required for
producing steam). The amount of water
which the machine can use before it
needs to be descaled will depend on
the water hardness level set. Less
water will be used in hard water areas
than in soft water areas.
Your local water authority will be able to
tell you the hardness of water in your
area. Alternatively, you can measure
the hardness yourself using the
enclosed test strip:
^
Dip the strip in your drinking water for
approximately a second, then shake
off any excess water. The result will
be evident after about a minute.
Settings: Customising your machine
30
30


Need help? Post your question in this forum.

Forumrules
1

Forum

miele-cva-3660

Reset search

  • Bij ontkalking blijft het display vragen: GOOI HET AFVALBAKJE LEEG. Deze is leeg. Maar apparaat wil verder niets doen. Hoe kan dit? Wat zie ik over het hoofd? Submitted on 10-8-2022 at 14:18

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Miele CVA 3660 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Miele CVA 3660 in the language / languages: English as an attachment in your email.

The manual is 1,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Miele CVA 3660

Miele CVA 3660 User Manual - German - 76 pages

Miele CVA 3660 User Manual - Dutch - 72 pages

Miele CVA 3660 User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info