564221
90
Zoom out
Zoom in
Previous page
1/107
Next page
Technical Information
80
CVA610 Coffee System
5.40 Grinder Unit - Assembly & Basic Setting
Refer to Figure 5-43 on the previous page…
Note
The grinder ring (Item 6), and grinder cone, (Item 5), should only
be exchanged together.
1. Fit the felt ring (Item 11).
2. Fit the carriers (Item 10).
3. Fit the mounting (Item 7).
4. Fit the springs (Item 9).
5. Fit the balls (Item 8).
6. Fit the grinding cone (item 6); ensure the balls are seated in the
grinding cone.
7. Fit the washer (Item 3).
8. Fit the intake worm gear (Item 2), press it down, and turn it until
the coupling engages.
Note
The grinding cone fixing screw (Item 1), has a left-hand thread.
9. Tighten the grinding cone fixing screw, (Item 1), counter
clockwise. Ensure the intake worm gear coupling has engaged
properly.
Note
Before setting the grinder, remove all coffee from the grinder.
10. Fit the bracket (Item 3).
11. The blue marking on the carrier (Item 2), has the same position
as the blue marking on the adjustment ring (item 1); both point
toward the front of the appliance.
12. Turn the adjustment ring clockwise as far as possible.
13. Turn the adjustment ring counterclockwise by 6 settings so that
the adjustment lever can be secured at a mid setting.
14. Fit the adjustment lever such that the grinder is set to a medium
grinding grade.
15. Tighten the adjustment lever fixing screws.
16. Push on the handle.
90


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Miele 620 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Miele 620 in the language / languages: English as an attachment in your email.

The manual is 2,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info