738628
12
Zoom out
Zoom in
Previous page
1/14
Next page
10 | BR01 instruction guide
Troubleshooting
Problem Possible Cause Solution
The radio doesn’t switch on
The battery pack is discharged and/or has not been installed
correctly.
Verify that the battery pack is charged and that it has been cor-
rectly installed.
The radio switches o shortly after it has been switched
on
Discharged battery pack. Recharge the battery pack.
The battery pack does not recharge
The battery-charger has not been connected or installed cor-
rectly.
Inspect the connections of the battery-charger and the installa-
tion of the batteries.
The radio switches on but is unable to receive signals
The site of installation is too shielded. Move to an another area.
The volume is too low Adjust the volume level.
Incorrect CTCSS or DCS
Check that the CTCSS tone or DCS code corresponds to the
one set by the parties you are communicating with.
It is not possible to communicate with other parties
An incorrect radio channel has been selected.
Select the same radio channel used by the parties you are com-
municating with.
The radio is installed in a shielded area or is too far from the party
you are communicating with
Move to another area.
Incorrect CTCSS or DCS
Check that the CTCSS tone or DCS code corresponds to the
one set by the parties you are communicating with.
Reception is fragmented and/or disturbed
The signal is very weak.
Try temporarily disabling the Squelch by means of the Monitor
feature.
The transmission distance is excessive and/or there are obsta-
cles in the transmission path
Move closer to the party you are communicating with or to ano-
ther area.
Other parties are using the same channel
Check the trac on the radio channel by means of the Monitor
feature and select another channel if required.
The radio has been installed too close to equipment that causes
interference (televisions, computers, etc.)
Increase the distance between the radio and this equipment.
The autonomy of the battery pack is limited Commission time is too high. Try reducing the transmission time and/or using a low power.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midland BR01 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midland BR01 in the language / languages: English as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Midland BR01

Midland BR01 User Manual - German - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info