684486
2
Zoom out
Zoom in
Previous page
1/9
Next page
CONTENTS
Model
Rated Voltage
8m
3.0V(Dry batteries R03/LR03 2)×
RG70E2(2)/BGEFU1
Remote Controller Specifications
Environment
Signal Receiving Range
-5 C 60 C(23 F~140 F)
O O
1
2
4
5
3
9
10
11
12
13
8
6
7
1
2
3
4
ON/OFF Button( )
Turns the air conditioner ON and OFF.
Operation of buttons
Temp Up Button( )
Decreases temperature in 1 C(1 F)
increments. Min. temperature is 16 C(60 F).
O O
O O
Temp Down Button( )
Increases temperature in 1 C(1 F)
increments. Max. temperature is 30 C(86 F).
O O
O O
NOTE
When the air conditioner operates under
heating mode with the set temperature of
16 C(60 F), pressing button twice in
one second will activate 8 Degree heating.
The indoor unit display shows FP .
O O
,,
,,
Scrolls through operation modes as follows:
Mode Button
AUTO
COOL
DRY
HEAT
FAN
NOTEPlease do not select HEAT mode if the
machine you p urchased is cooling only type.
Heat mode is not supported by the coolin g only
appl iance.
Used to enter the energy efficient mode.
Under cooling mode, press this button, the
air conditioner will automatically operate at
24 C(75 F), with auto fan speed.
O O
ECO Button
1
2
6
7
7
8
9
9
13
Handling the remote controller ......................................................
Remote controller Specifications...................................................
Operation of buttons ............ .........................................................
Indicators on LCD ..........................................................................
How to use the buttons .................................................................
AUTO/COOL operation....................................................................
DRY/FAN operation.........................................................................
HEAT operation ..............................................................................
Setting the Timer function .............................................................
Temp
Mode Fan
Swing
Direct
OK
Timer
Super
Options
Pressing the ECO button, or modifying the
mode or adjusting the set temperature to
less than 24 C(75 F) will stop ECO operation.
The ECO operation will be stopped automatically
after 8 hours. Under ECO operation, the set
temperature should be 24 C(75 F) or more,
it may result in insufficient cooling. If you feel
uncomfortable, just press the ECO button
again to stop it.
NOTE:
O O
O O
Press and hold and buttons
together for 3 seconds will alternate the tem-
perature display between the C & F scale.
UP DOWN
O O
HEAT
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midea RG58 Remote control at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midea RG58 Remote control in the language / languages: English as an attachment in your email.

The manual is 1,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info