684492

Midea 36SME5GFQ00048 Manual

14
Zoom out
Zoom in
Previous page
1/16
Next page
14
Disassembly of the worktop must only be done by a
qualified service technician.
DISASSEMBLE OF WORK-TOP
In case it is necessary to repair or replace the inside compo-
nents, act as follows:
Remove the grids, remove burners and flame-spreaders (see
fig. 6), unscrew the visible screws “V” placed on the work-top
(see fig. 7). Disassemble the work-top by unscrewing the rear
screws “A” (see fig. 8 according to the models). In this way it
is possible to lift the work-top and to reach the inside compo-
nents.
OPTIONAL: ONLY FOR THE MODELS EQUIPPED WITH
TELESCOPIC RAILS
The oven is equipped with telescopic rails to position the pan
and wire grid (Fig. 3d).
You can change the position, depending on your personal
taste and needs ofdifferent foods (Fig. 3e).
Fig. 6
Fig. 7
V
mod. 296
Fig. 8
A
GREASING OF TAPS
If a tap becomes hard to be turned, grease it using a specific
grease withstanding high temperatures. Act as follows: open
the work-top and disassemble also the control panel as
described on the previous paragraph. Unscrew the two fixing
screws from the burner body (see picture) and remove the
cone.
TAPS REPLACEMENT
Act as follows: open the work-top and disassemble also the
control panel as described on the previous paragraph.
Unscrew screw nut D of the gas tube supplying the burner.
Unscrew screw V fixing the tap to the bridle and remove it (see
picture).
Note: Every time the tap is replaced, it is necessary to replace
the seal gasket too check the connection seal by means of
soapy water.
Clean the cone and its slot by means of a cloth soaked with
solvent. Slightly grease the cone with the relevant grease, put
it in its slot, and turn it some times. Remove the cone again,
remove the excess grease making sure the gas entries are not
obstructed by grease residue. Assemble everything carefully
in the opposite direction check the connection seal by means
of soapy water.
15
7
D
V
Fig. 3D
Fig. 3E
… 14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midea 36SME5GFQ00048 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midea 36SME5GFQ00048 in the language / languages: English as an attachment in your email.

The manual is 8,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info