658488
76
Zoom out
Zoom in
Previous page
1/80
Next page
58 Appendix F: Setting Up An XL8 System
DL431 Mic Splitter
Operator Manual
Switching the XL8 Control Centre on/off
Carry out the following to switch the XL8 Control Centre on/off in a safe manner,
observing all WARNINGS and Cautions.
>> To switch on the XL8 Control Centre
WARNING!
DO NOT INSERT OR REMOVE A POWERCON® CONNECTOR
INTO/FROM REAR OF CONTROL CENTRE WITH MAINS POWER AND
ANY OF THE MAINS BAY SWITCHES ON. YOU MUST MAKE SURE ALL
MAINS BAY SWITCHES ARE OFF AND MAINS IS SWITCHED OFF AT THE POWER
OUTLET(S) FIRST.
Caution!
Before switching on, check that all monitor loudspeaker power
amplifiers are turned off or muted.
After connecting up the audio cables, carry out the following:
1 Plug the two control centre’s mains PowerCon® cables into the mains power
outlets.
2 Insert the two mains PowerCon® connectors into the PowerCon® sockets on rear
of control centre, observing the WARNING! above. Then, lock each one by
twisting the PowerCon® connector about 90° (1/4 turn) clockwise; you should
hear a click when it has locked in place. Check that both PowerCon® connectors
are securely fitted.
3 Observing the Caution! above, switch on all five bay mains on/off switches, one
after the other. It is important that you don’t switch on two or more
switches simultaneously.
4 The control centre will power up; the GUI will display the default screens and all
the controls will be set to default. You are now ready to start using the XL8
control centre.
1
Mains
outlet
Mains
plug
x5
3
Rear of XL8 Control Centre
x2
2
PowerCon®
connector
PowerCon®
socket
76


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midas DL431 Mic Splitter at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midas DL431 Mic Splitter in the language / languages: English as an attachment in your email.

The manual is 7,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info