658474
5
Zoom out
Zoom in
Previous page
1/9
Next page
8 MIDA S DL16 User Manual 9 MIDA S DL16 User Manual
4. Conguring the DL16
By using the CONFIG button and SELECT/ADJUST knob, the DL16 can be congured
to suit many dierent applications. The STATUS LEDs indicate the current settings.
By holding the CONFIG knob while turning the SELECT/ADJUST knob, you can
scroll through all 10 conguration options. See the Operation Mode Chart for the
routing details of each conguration setting.
When using multiple DL16 units, activating SN(ake) MASTER mode on one unit
allows that unit to control the preamp gain of the second unit. An DL16 set to
SN MASTER will also dictate the overall clock synchronization (44.1 or 48 kHz).
Thisis useful when using a pair of DL16s as a standalone digital snake (16 x 16)
ora 32-channel mic preamp via ADAT. See the ’Standalone Operation’ section
fordetails.
SPLITTER mode routes the 16 local analog inputs directly to the ADAT outputs
and ULTRANET output. This is useful when using the DL16 as a standalone snake
where the ULTRANET monitor mix cannot be adjusted from an M32 console.
Additionally, the DL16 can be used as a high-quality mic preamp that sends the
16 inputs to an interface or computer with an ADAT card for recording purposes.
When SPLITTER mode is o, the ADAT outputs carry AES50 channels 17-32 and the
ULTRANET output carries channels 33-48.
The OUT +8 and OUT +16 options shift the XLR outputs for use with
multiple DL16s. For example, if a connection scenario involves 3 daisy-chained
DL16s, therstunit will carry AES50 channels 1-8. The second unit should be set
to OUT+8 so that its analog outputs carry channels 9-16, and the 3rd DL16 should
be set to OUT+16 so that its analog outputs carry channels 17-24. This way you
can provide up to 24 return signals to the stage. Alternatively, you may also use
the same block of 8 output signals on a set of distributed DL16 stageboxes.
MIDAS DL16 Operation Mode Chart
Seq.
LED
SN MASTER
sync clock
LED
SPLITTER
LED
OUT +16
LED
OUT +8
XLR analog
out 1-8
ADAT
out 1-8
ADAT
out 9-16
P-16 Ultranet
out 1-16
1 (default) AES50 (console)
= AES50-A,
ch01-ch08
= AES50-A
ch17-ch24
= AES50-A
ch25-ch32
= AES50-A
ch33-ch48
2 AES50 (console) on
= AES50-A
ch09-ch16
= AES50-A
ch17-ch24
= AES50-A
ch25-ch32
= AES50-A
ch33-ch48
3 AES50 (console) on
= AES50-A
ch17-ch24
= AES50-A
ch17-ch24
= AES50-A
ch25-ch32
= AES50-A
ch33-ch48
4 AES50 (console) on
= AES50-A,
ch01-ch08
= Local In
01 - 08
= Local In
09 - 16
= Local In
01 - 16
5 AES50 (console) on on
= AES50-A
ch09-ch16
= Local In
01 - 08
= Local In
09 - 16
= Local In
01 - 16
6 AES50 (console) on on
= AES50-A
ch17-ch24
= Local In
01 - 08
= Local In
09 - 16
= Local In
01 - 16
7 on 48 kHz (int)
= AES50-A,
ch01-ch08
= AES50-A,
ch01-ch08
= AES50-A
ch09-ch16
= AES50-A
ch01-ch16
8 on 44.1 kHz (int)
= AES50-A,
ch01-ch08
= AES50-A,
ch01-ch08
= AES50-A
ch09-ch16
= AES50-A
ch01-ch16
9 on 48 kHz (int) on
= AES50-A,
ch01-ch08
= Local In
01 - 08
= Local In
09 - 16
= Local In
01 - 16
10 on 44.1 kHz (int) on
= AES50-A,
ch01-ch08
= Local In
01 - 08
= Local In
09 - 16
= Local In
01 - 16
Linking two DL16 units
IN 1-16
OUT 17-24
OUT 25-32
ADA8200
ADA8200
OUT 1-8
OUT 9-16
IN 17-32
M32
Note: The signals on both DL16 units (Out 1-8 and 9-16) and both ADA8200 units (Out 17-24 and 25-32)
are fully dened on the M32’s ’Routing/AES50 Output’ page. The second DL16s outputs must be set to
Out+8on the unit itself.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midas DL16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midas DL16 in the language / languages: English as an attachment in your email.

The manual is 6,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info