714874
12
Zoom out
Zoom in
Previous page
1/14
Next page
Prodomus
12
Before the first use
Caution: Never use the appliance near hot surfaces and keep the cord away from heat
resources to avoid damage.
Place the appliance on a dry, stable and flat working place next to a power socket.
Run the cable in a way that nobody can pull on it or stumble over it.
See the description on page 2 first to get familiar with the appliance.
Before making coffee for the first time it is advisable to let the water run through 2 - 3 times without
using coffee. Then clean filter and jug. The special smell from new appliances and production
residues will be removed then.
Preparing coffee
Preparation: Before switching on the appliance, open the lid and pour the desired volume
of water into the water tank. Always take fresh, cold water never take hot water to fill the tank.
The amount of cups can be read on water level indicator at the water tank.
Only fill water up to the MAX marking, not more.
Place the thermo jug under the filter arrangement with fully and firmly closed lid. Push the
small lever at the lid of the thermo jug slightly downward. This allows to put the thermo jug
under the filter holder easily. For maximum heat retention, rinse the thermo jug with hot
water. The thermo jug has a drip-through-lid. Close the lid firmly, the handle of the thermo
jug and the lever of the lid must be parallel. Always place the thermo jug on the appliance
under the filter unit before you switch on the appliance!
Open the filter unit. Insert the permanent filter (or paper filter 1 x4 is also possible) and fill
in the desired quantity of ground coffee. Close the lid.
Connect to power source, 12:00 will show on display.
Press ON/OFF button once, the green indicator is illuminated. Press ON/AUTO /OFF
button again, the red indicator is illuminated and coffee brewing will start. After some
seconds, hot coffee will drop out automatically.
If you press the ON/OFF button again (third time), the red indicator goes out and the coffee
maker stops working.
After brewing is finished and hot coffee has stopped dripping, you can empty the jugs and
clean them.
CAUTION! Never operate the appliance without the provided thermo jug!
The appliance automatically switches off after ending the brewing process!
To interrupt the brewing process, it is also possible to switch manually into “0FF” position.
After brewing is finished:
Remove the thermo jug. Push slightly down the lever at the lid of the thermo jar, this
makes removing easier.
For pouring coffee, slightly push the lever (button) at the lid of the thermo jug.
Keeping warm: The rest of the coffee keeps warm in the double-wall thermo jug for a long
time if the lid is closed. The warming plate of the appliance gets warmed passively during the
brewing process. Rest heat of the warming plate will warm the bottom of the thermo jug
for a while. The warming plate will not re-heat.
Note
Fill cold water only into the water compartment. Do not pour milk or ready-made beverages
into the water compartment to avoid staining and damage.
Switch off the appliance and let it cool down for minimum 5 minutes before reusing.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mia KF 1735T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mia KF 1735T in the language / languages: English, German, French as an attachment in your email.

The manual is 0,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info