Manual Mia IKP2212 (page 18 of 20) (English, German, Dutch, French, Polish)

714864

Zoom out

Zoom in

1/20

PRODOMUS

Operating of the device

Caution! Never leave the appliance unattended when it is in operation!

Please follow the sequence below when adjusting the appliance. You can adjust power (watts)

and cooking time (hours/minutes).

Power levels: 300 / 500 / 600 / 800 / 1000 / 1100 / 1200 / 1400 / 1600 / 1800 W

Time presetting: 3 hours or 180 minutes (in 1 minute steps)

 Before plugging always place suitable cookware filled with food centred onto the induction cooking

plate. Otherwise error function will occur (see Chapter “Safety function”).

 Insert the plug into a suitable socket, a short acoustic signal resounds. The appliance switches into

Standby Mode.

 Now press the ON/OFF switch to turn the device on. A short acoustic signal resounds (whenever

you press a button again or new button, a short acoustic signal resounds). The fan inside begins

to work. The display now shows automatically 1800 for highest power level. This is an automatic

presetting.

The appliance is now in the power mode. Select the desired power level higher or lower by pressing

the – (down) or + (up) buttons. You can adjust the power levels from 300W to 1800W. You can

make adjustments of power mode manually by pressing the arrow buttons.

 Use the button "TIMER" for pre-setting the cooking time or controlling the cooking time remained.

Adjust the cooking time by pushing the Up and Down buttons. Time is adjustable between

1 minute (00:01) and 3 hours 02:59 (= 180 minutes).

 When pushing TIMER button one time only, the digits for hour are active and show the cooking

time adjusted or the remaining cooking time in h:min. The left digits showing the hours, are

flashing. To change the time just push the Up and Down buttons.

 When pushing the TIMER button a second time, the digits for minutes are active and flashing.

To change also push the arrow buttons. To save the adjusted time, just wait some seconds without

pushing any button.

 TIMER function is active as long as the LED control lamp above the clock symbol is illuminated. To

deactivate/delete the timer function, push the TIMER button several times, till the control lamp above

switches off. Now timer is off. The display will now indicate the last value of power level which has

been adjusted before. When the adjusted time has elapsed, an acoustic signal will sound and the

appliance will change into standby mode.

After finishing the cooking or keeping warm process always switch off the device and unplug. All

functions can be adjusted manually by pressing the corresponding buttons. We recommend to follow the

instructions in chapter “Operating of the device”. Do not use the appliance if it shows any sign of damage

or malfunction. Please contact the customer service (see “Warranty claims”) in such case. Do not put

empty cook ware on the appliance and do not leave cookware too long on the appliance to avoid comp-

letely boiling away of the liquid. Overheating of cookware will activate the boil dry protection of the device.

Note: If the unit displays the error code E2, it has been overheated by too hot cookware.

In this case turn off and unplug the appliance and let it cool down completely.

Lock function

Press the ”Lock” button for several seconds until the Lock indicator light shines to lock up the functions.

In the state, no buttons can be operated and misuse can be avoided.

To unlock, press the “Lock” button again for several seconds until the Lock indicator light turns off.

Safety functions

All error codes you will find in the table below. Please see "safety functions" on page 15 and 16 also.

Symptom

Possible cause and corrective action

Display shows E-0

No pot on heating plateԁ

No pot that suits, pot bottom surface less than 10 cm

Put the pot correctly on the middle of the plate

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Mia IKP2212 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 1,01 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Mia IKP2212 Manual

Product: