715857

Mia HK1031 Manual

8
Zoom out
Zoom in
Previous page
1/9
Next page
Prodomus
14
Warning: Do not use this electric blanket on or under any waterbed or
mechanically adjustable type of bed such as a bunk or sofa bed.
Check to ensure that the controller and supply cord cannot become
trapped in any bed or bedding. Keep controller outside of the bedding
as much is possible.
Secure blanket through middle and corners (indicated by dotted lines).
Warning: Use the correct size of blanket for the bed. Do not for
example use a double blanket on a single bed, do not tuck the blanket
in.
x Check the appliance frequently for signs of wear or damage. If
there are such signs or if the appliance has been misused, it must
be returned to the manufacturer or dealer for check prior to any
further use.
x If the mains cable is damaged, it should only be replaced at a
repair workshop approved by the
manufacturer, as special tools are required for the repair.
x Repairs to electrical appliances must be carried out only by trained
personnel. Improper repair
could result inconsiderable risks for the user.
x When the appliance is not in use, the plug should be removed from
the mains and the appliance.
x Unplug the cord from the mains:
- when malfunction occurs during use
- before cleaning
- after use and for storing.
x Do not operate the appliance with a damaged cord, if it
malfunctions or has been damaged in any manner. Ask a (*)
competent qualified electrician to check and repair it.
x Should the cord be damaged, it must be replaced by a competent
qualified electrician(*) to avoid any danger. All repairs should be
made by a competent qualified electrician(*).
(*)Competent qualified electrician : after sales department of the
producer or importer or any person who is qualified, approved and
15
competent to perform this kind of repairs in order to avoid all danger.
In any case you should return the appliance to such electrician.
S
S
C
C
O
O
P
P
E
E
O
O
F
F
D
D
E
E
L
L
I
I
V
V
E
E
R
R
Y
Y
x Under blanket
x Switch and power cord (removable)
x Instruction manual
B
B
E
E
F
F
O
O
R
R
E
E
F
F
I
I
R
R
S
S
T
T
U
U
S
S
E
E
Remove all packaging parts before initial operation.
When the warming pad is used for the first time, it can smell of plastic, but this disappears after a short
time. Before starting the first time, insure that the temperature control switch is in OFF position. Use
the appliance as an under blanket only. This appliance is only for warming up beds. The best results
may be expected when the warming pad is placed under the bed sheet and covered by the cover
before switching it on. Do not place the switch under a cover. Pre-heating time takes about 40 minutes
when covered. You can use the warming pad on both sides.
The warming pad is provided with an overheating protection and will switch off when failure occurs. If
the protective device is ruptured, the appliance must be returned to the manufacturer or his agent to
repair.
The appliance may only be used with 220~240 Volts a.c.
I
I
N
N
I
I
T
T
I
I
A
A
L
L
O
O
P
P
E
E
R
R
A
A
T
T
I
I
O
O
N
N
Place the blanket flat on the bed, with the controller at the pillow end, ensuring that the blanket does
not overhang the bed edge and is not in the area of any intended pillow. Unwind the tie tags and
secure the blanket to the bed. Secure each corner and also the middle to avoid that the warming pad
can get folded or crumpled. The warming pad may only be switched on when it is flat and unfurled. It is
recommended to switch on the warming pad about 40 minutes before going to bed and keeping it covered
during this time to avoid that the warmness will leak from the bed.
Once the electric blanket has been installed correctly in position and the bedding completed, connect
the controller supply plug to a suitable power outlet. Ensure the controller is set to Off. Switch the
power on. Select the desired heat setting on the controller. The indicator lamp on the switch indicates
that the blanket is ON.
For first time use it is recommended that the blanket be set on level 3 for 2 hours before sleeping on
the bed. This will assist in drying any moisture out of the mattress. Any initial small odour that may occur
with first lime use is harmless and will disappear soon.
Only operate the blanket with the supplied switching unit model HK 1031.
CAUTION: The electronic components inside the switch may lead to a slight warming of the
switch when the pad is on. Therefore the switch must not be covered or placed on top of the
warming pad when it is in operation.
U
U
S
S
I
I
N
N
G
G
T
T
H
H
E
E
E
E
L
L
E
E
C
C
T
T
R
R
I
I
C
C
U
U
N
N
D
D
E
E
R
R
B
B
L
L
A
A
N
N
K
K
E
E
T
T
Switch on the appliance using the hand-operated switch.
When using level 3 the warming pad will get warm faster. When using the warming pad for several
hours it is recommended to use level1.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mia HK1031 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mia HK1031 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 1,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info