715829

Mia DB8465K Manual

13
Zoom out
Zoom in
Previous page
1/16
Next page
Prodomus
13
“Standby-mode” automatically then (see fig. 4) „Standby“ is a safety function to avoid burn and
damage of the textiles if the iron will be left parked in vertical position and will not be moved any
more for a longer time. The iron indicates this with an acoustic signal and the word „Standby“ will
appear on the display. As soon as the iron will be moved again, it will change into the preset
adjustment. The red control lamp is switched off and the blue control lamp is illuminated. Then
preset adjustment is indicated in the display again.
If the iron is positioned upright for a longer time, it will change into „Standby“ mode after approx.
20-30 minutes. The red control lamp will flash permanently then.
Temperature adjustment and indication
Always check first to see whether a label with ironing instruction is attached to the article to be
ironed.
Synthetic fibres, Acryl, Viscose, Polyamide, Polyester (low temperature, see fig.1)
 silk, wool (medium temperature)
 cotton, linen (high temperature, see fig. 3)
MAX highest temperature setting for thick cotton or linen fabrics
The appliance provides a 4-level temperature adjustment with blue illuminated LED indication on
top of the handle. The desired temperature can be adjusted by pressing the temperature control
(see fig. 1). The levels from 1-4 (= MAX) are indicated as soon as the temperature control will be
pressed. Press 1 x = low level , press 2 x =  next higher level etc. Each time you press the
temperature control an acoustic signal will sound.
The selected operation mode is indicated by various symbols in the display (see the pictures 1-4
in the following instruction also).
While heating up a thermometer picture will appear on the right side next to the temperature
indication (see Fig. 2 and 3). It indicates that the appliance is heating up until the appliance has
reached the adjusted temperature. Then it will switch off.
Fig. 1 Fig. 2
Fig. 3 Fig. 4
Ironing without steam
Before starting ironing always check first whether a label with iron symbol is attached in the
reverse side of the cloth. See the table provided in these instructions for choosing the right
ironing level. Follow these ironing instructions in all cases. Start ironing by using textiles which
need low iron temperature like synthetics, silk. Ensure that steam control is in position “0” (Fig. 1,
“Steam off”). Tip: Sensitive fabrics tend to get glossy stripes or water spots while using steam.
When steam-ironing woollen fabrics, shining of the fabric may occur. This can be prevented by
turning the article inside out and ironing the reverse side. Iron all sensitive fabrics by turning them
to the reverse side first. To avoid risks completely do not use steam while ironing sensitive
fabrics.
Steam control
Temparature control
Burst of steam
button
Spray button
Self cleaning button
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mia DB8465K at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mia DB8465K in the language / languages: English, German, French as an attachment in your email.

The manual is 0,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info