715836

Mia DB8348 Manual

16
Zoom out
Zoom in
Previous page
1/17
Next page
Prodomus
Instruction
16
Steam ironing (is possible at higher
temperatures only).
Steam ON - turn the steam control to the
right (clockwise direction) till it is engaged.
Steam OFF - turn the steam control to the left
(counterclockwise direction) until it is engaged.
For using the steam function, turn the steam
control to “OFF” position and set the tempera-
ture control at the  or  position.
When the red control lamp switches off (click
sound), turn the steam control to the maximum
position, steam will exhaust, steam ironing can
be started. In vertical position steaming is
being stopped automatically.
After finishing steam ironing, let the rest steam
exhaust from the sole plate. Then turn the
temperature control (MIN) and the steam
control to the “OFF” position. Unplug and let
the iron cool down. Then pour out remaining
water.
NOTE: Water may leak from the soleplate if
the temperature is too low. If so set the tem-
perature control to a higher temperature.
Always position the appliance in upright position
during breaks. This avoids leakage of water (if
steam control has not been switched off).
Before parking the iron in level position, leave
the iron steaming for a while in upright position.
Make sure that remaining water has been
vaporized completely from the sole plate.
Then turn the steam control to OFF position.
This avoids remaining water and leaking or
dripping from the sole plate, when storing at
level position.
How to use spray
The spray function can be used with steam
and/or dry ironing provided that there is water
in the tank. Press the spray button firmly and a
vaporised water will spray out from the nozzle
humidifying the fabric for easy ironing of
creases.
Dry ironing
Set steam level selector to “0”. Steam is now
switched off for dry ironing.
How to use self clean
Calcified water, dust or fuzz can block the
steam outlets. It is recommended to clean the
appliance from time to time and not to leave
water in the tank. Ensure that the water tank
is filled with water up to the max mark. Turn
the temperature control and the steam control
into maximum level. Let the appliance heat up
for a while in upright position, in order to get
enough pressure. Turn the steam control to
OFF position, to even increase pressure. Hold
the iron over an piece of old cloth. Then push
the steam burst button several times. Several
strong steam bursts will exhaust and clean the
steam outlets (please note chapter "steam
ironing" for more information).
After Ironing
Put the appliance into upright park position.
Pull the plug and let the appliance cool down
sufficiently. Then empty the remaining water to
avoid calcifying. Before storing the iron, let it
cool down completely.
Cleaning and storing
Caution! Danger of electrical shock!
Never immerse the appliance into water.
The connector parts must not get wet. Contact
of electrical parts with moisture causes short
circuit and damage.
Unplug the appliance after each use and
before cleaning, or storing it.
… 16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mia DB8348 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mia DB8348 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info