654460
1
Zoom out
Zoom in
Previous page
1/2
Next page
Weighing Setup: For more precision / shorter stability time
On
Off
Example
On
Off
G
H
B
C C C
D
XP Balance
I
XS Balance
Short Operating Instructions
For further information, please refer to the operators Manual
METTLER TOLEDO
XP / XS Analytical- and Precision Balances
Basic Functions:
Switching on
and off
Display
1. Switch on display:
Press the «On/Off»
key briefly. The display
performs a test and is
then ready to weigh.
2. Switch off Display;
Press and hold the
«On/Off» key until the
message OFF” ap-
pears in the display.
The display then fades
and the balance is
switched off.
User Profile: *only XP
Choose
User Profile
This key can be used to
call up the desired user
profile. Different settings
can be stored in a user
profile.
Zero
Display
Zeroing: Press the
«G» to set a new
zero point.
Always use the «G»
before you start the
weighing procedure.
Tare
Display
Taring: If you work with
a Tare container, first
zero the balance. Then
put the Tare container
on the balance and
press «H», to tare
the balance.
Weighing-
Applications
Choose the applica-
tion: If you want to
change the application,
then press the applica-
tion menu button and
choose another ap-
plication.
Levelling, Internal
Adjustment
(Factory setting)
1. Level indicator is built-
in in the device.
2. Level indicator is not
centered.*
3. Release the clamps.*
4. Levelling. After this pro-
cess, lock the clamps
again.*
5. Internal Adjustment
Pressing this function
key triggers a balance
adjustment using the
built-in calibration
weight. This can be
implemented at any
time.
*
depending on balance
Weighing filters:
Weighing mode
1. Choose System-Set-
up
2. Define Weighing pa-
rameters
3. Define the Weighing
mode
Advise:
Solids:
«Universal»
Powder, Liquid:
«Dosing»
Weighing filters:
Environment
1. Choose System-Set-
up
2. Define Weighing pa-
rameters
3. Define Environment
Advise:
Fume cupboard – un-
stable weighing table:
«
Unstable»,
«Very unstable»
Stable Weighing table,
no drafts
«Standard», «Stable»
Weighing filters:
Value Release
1. Choose System-Set-
up
2. Define Weighing pa-
rameters
3. Define Value Release
Advise:
Highest Precision:
«Very reliable»
Fast Value Release:
«Very fast»,
but less precision
Test:Additional Functions:
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mettler-Toledo XS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mettler-Toledo XS in the language / languages: English as an attachment in your email.

The manual is 0,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info