780667
3
Zoom out
Zoom in
Previous page
1/16
Next page
FOREWORD
Thank you for choosing a universal METRONIC remote. We are condent you will be
fully satised with this product. Models ZAP 2 enable to manage 2 appliances: TV
or DVB-T (TNT). After inserting the 1.5V AAA batteries (not supplied) in the remote,
you
can set up the remote for each appliance that you wish to control. The universal
ME
TRONIC remote has been conceived to control most products of each brand. In
the set up details below, we use a TV as example. In order to set up the remote for
your DVB-T set up box , replace ‘TV with ‘TNT. After you have set up the remote,
simply press the TV or TNT key to select the appliance you wish to control.
Automatic Search
1 - Switch on your TV. The automatic search might take a little while (up to 15 minutes).
2 - Press the PROG and TV keys together for a few seconds until the light switches
on. When you release the keys the light should stay on.
3 - Press the PROG key. The light should start blinking. Press the key until the light
switches
o and slowly starts blinking again. This means the automatic search
has started. The light should stay on and blink every time a new code is entered.
You should be ready to press the OK key.
4 - As soon as the TV switches o, press the OK key. The light should start blinking.
Press the TV key. The light should switch o. Note: You should be quick enough
not to exceed 1 second before the next code from your remote control (a bit less
than 1 second between turning TV o and time to press key «0»).
5 - As your TV is now switched o, switch it on again using the original remote or
with the front keys.
6 - Point the remote towards your TV and try using the main features (changing
channels, adjusting sound…). If the remote does not control the TV properly, try
the automatic set up again (from 2). If the remote controls the TV correctly, then
the set up is over.
Changing batteries
When the remote starts struggling to control the appliances or if it does not work
properly, you should try changing batteries. Thanks to its memory function, you can
change batteries withouht losing your settings on the remote.
GB | 2 in 1 UNIVERSAL REMOTE CONTROL
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metronic Zap 2 - 495380 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metronic Zap 2 - 495380 in the language / languages: English, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1.12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info